From: Kever Yang <kever.yang@rock-chips.com>
Date: Fri, 10 Oct 2014 04:50:30 +0000 (-0700)
Subject: ARM: dts: rockchip: enable init rate for clock
X-Git-Tag: v3.19-rc1~57^2~26^2~1
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=cd78d0cd63ebce518b5c342fe6ef1f4613bb039d;p=karo-tx-linux.git

ARM: dts: rockchip: enable init rate for clock

We need to initialize PLL rate and some of bus clock rate while
kernel init, for there is no other module will do that.

Basically on rk3288 we use GPLL for cpu bus, peripheral bus and
most of peripheral clock, CPLL for devices who require 50M/200M
clock rate, leave NPLL behind for special requirement from
display system.

The common-clock-framework will help us to select best source for
child clocks after we init the PLLs propriety.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index cb18bb457568..b53e833e5667 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -472,6 +472,16 @@
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+				  <&cru PLL_NPLL>, <&cru ACLK_CPU>,
+				  <&cru HCLK_CPU>, <&cru PCLK_CPU>,
+				  <&cru ACLK_PERI>, <&cru HCLK_PERI>,
+				  <&cru PCLK_PERI>;
+		assigned-clock-rates = <594000000>, <400000000>,
+				       <500000000>, <300000000>,
+				       <150000000>, <75000000>,
+				       <300000000>, <150000000>,
+				       <75000000>;
 	};
 
 	grf: syscon@ff770000 {