From: Philipp Zabel Date: Tue, 4 Jun 2013 09:12:29 +0000 (+0200) Subject: ARM i.MX53: tqma53: rev 300 specific pin configuration X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ce2c243c9d8de6e541c99108202a7a585abf7849;p=linux-beck.git ARM i.MX53: tqma53: rev 300 specific pin configuration I2S_MCLK is moved from pad GPIO19 to GPIO0, which can be muxed to the ssi_ext1 clock signal. #SYSTEM_DOWN is moved from pad GPIO0 to GPIO19. Add #PHY_RESET and LCD_CONTRAST. Signed-off-by: Philipp Zabel Signed-off-by: Steffen Trumtrar Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 45a273b365c7..450e4de9a38c 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -72,7 +72,6 @@ i2s { pinctrl_i2s_1: i2s-grp1 { fsl,pins = < - MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* I2S_MCLK */ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 /* I2S_SCLK */ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 /* I2S_DOUT */ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */ @@ -84,16 +83,17 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x80000000 /* VSYNC */ - MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x80000000 /* HSYNC */ + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */ MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */ MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */ MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */ MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */ MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */ MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */ - MX53_PAD_GPIO_0__GPIO1_0 0x80000000 /* SYSTEM_DOWN */ + MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* #SYSTEM_DOWN */ MX53_PAD_GPIO_3__GPIO1_3 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 /* #PHY_RESET */ + MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */ >; }; };