From: Andreas Faerber <afaerber@suse.de>
Date: Tue, 23 Sep 2014 15:01:50 +0000 (+0900)
Subject: ARM: dts: Simplify USB3503 on exynos5250-arndale
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ceb5b5deaf6ffc2712071d9e89b2acd8eb1651e2;p=linux-beck.git

ARM: dts: Simplify USB3503 on exynos5250-arndale

There's no need for a simple-bus, place the smsc,usb3503a directly into
the root node. That's what we're going to do on exynos5250-spring.

Reported-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index e01270878dfc..7e728a1b5559 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -108,18 +108,12 @@
 		};
 	};
 
-	usb_hub_bus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	// SMSC USB3503 connected in hardware only mode as a PHY
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
 
-		// SMSC USB3503 connected in hardware only mode as a PHY
-		usb_hub: usb_hub {
-			compatible = "smsc,usb3503a";
-
-			reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
-		};
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
 	};
 };