From: Johannes Berg Date: Fri, 4 Sep 2015 09:27:25 +0000 (+0200) Subject: iwlwifi: mvm: stop using DEVICE_POWER_FLAGS_CAM_MSK X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ceef91c89480dd18bb3ac51e91280a233d0ca41f;p=linux-beck.git iwlwifi: mvm: stop using DEVICE_POWER_FLAGS_CAM_MSK The firmware has always treated these two bits to mean that powersave is enabled when POWER_SAVE_ENA is set and CAM is clear; it doesn't use them in any non-combined way. Therefore, it's pointless to send it two bits, and the API should be cleaned up. Prepare the driver by removing the CAM bit and using only POWER_SAVE_ENA to indicate whether PS is enabled or not. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h index 7005fa4be74a..c8f3e2536cbb 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -192,16 +192,10 @@ struct iwl_powertable_cmd { /** * enum iwl_device_power_flags - masks for device power command flags * @DEVIC_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off - * receiver and transmitter. '0' - does not allow. This flag should be - * always set to '1' unless one need to disable actual power down for debug - * purposes. - * @DEVICE_POWER_FLAGS_CAM_MSK: '1' CAM (Continuous Active Mode) is set, meaning - * that power management is disabled. '0' Power management is enabled, one - * of power schemes is applied. + * receiver and transmitter. '0' - does not allow. */ enum iwl_device_power_flags { DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), - DEVICE_POWER_FLAGS_CAM_MSK = BIT(13), }; /** diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c index 21a858dfcc26..723b537341c4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -471,14 +471,14 @@ static int iwl_mvm_power_send_cmd(struct iwl_mvm *mvm, int iwl_mvm_power_update_device(struct iwl_mvm *mvm) { struct iwl_device_power_cmd cmd = { - .flags = cpu_to_le16(DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK), + .flags = 0, }; if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM) mvm->ps_disabled = true; - if (mvm->ps_disabled) - cmd.flags |= cpu_to_le16(DEVICE_POWER_FLAGS_CAM_MSK); + if (!mvm->ps_disabled) + cmd.flags |= cpu_to_le16(DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK); #ifdef CONFIG_IWLWIFI_DEBUGFS if ((mvm->cur_ucode == IWL_UCODE_WOWLAN) ? mvm->disable_power_off_d3 :