From: Thomas Petazzoni Date: Thu, 13 Feb 2014 16:11:27 +0000 (+0100) Subject: pinctrl: mvebu: remove MPP_REG_CTRL macro X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=cffa7a6b108f44c740ec316cdfd99524a86475e4;p=linux-beck.git pinctrl: mvebu: remove MPP_REG_CTRL macro Now that each per-SoC pinctrl driver must implement its own get/set functions, there is no point in keeping the MPP_REG_CTRL macro, whose purpose was to let the core pinctrl mvebu driver use default get/set functions. While at it also update the comment about mvebu_mpp_ctrl. Signed-off-by: Thomas Petazzoni Signed-off-by: Sebastian Hesselbarth --- diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.h b/drivers/pinctrl/mvebu/pinctrl-mvebu.h index c73f4eea62ac..65a98e6f7265 100644 --- a/drivers/pinctrl/mvebu/pinctrl-mvebu.h +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.h @@ -28,10 +28,9 @@ * between two or more different settings, e.g. assign mpp pin 13 to * uart1 or sata. * - * If optional mpp_get/_set functions are set these are used to get/set - * a specific mode. Otherwise it is assumed that the mpp control is based - * on 4-bit groups in subsequent registers. The optional mpp_gpio_req/_dir - * functions can be used to allow pin settings with varying gpio pins. + * The mpp_get/_set functions are mandatory and are used to get/set a + * specific mode. The optional mpp_gpio_req/_dir functions can be used + * to allow pin settings with varying gpio pins. */ struct mvebu_mpp_ctrl { const char *name; @@ -114,18 +113,6 @@ struct mvebu_pinctrl_soc_info { int ngpioranges; }; -#define MPP_REG_CTRL(_idl, _idh) \ - { \ - .name = NULL, \ - .pid = _idl, \ - .npins = _idh - _idl + 1, \ - .pins = (unsigned[_idh - _idl + 1]) { }, \ - .mpp_get = NULL, \ - .mpp_set = NULL, \ - .mpp_gpio_req = NULL, \ - .mpp_gpio_dir = NULL, \ - } - #define MPP_FUNC_CTRL(_idl, _idh, _name, _func) \ { \ .name = _name, \