From: DoHyun Pyun Date: Wed, 2 Oct 2013 12:54:46 +0000 (+0900) Subject: Bluetooth: Add the definition and structure for Set Reserved LT_ADDR X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d0bf75a51b172fdd9dd90bfa03c0f5de473b6c94;p=linux-beck.git Bluetooth: Add the definition and structure for Set Reserved LT_ADDR The Set_Reserved_LT_ADDR command allows the host to request that the BR/EDR Controller reserve a specific LT_ADDR for Connectionless Slave Broadcast. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 90 "7.3.86 Set Reserved LT_ADDR Command [New Section] ... If the LT_ADDR indicated in the LT_ADDR parameter is already in use by the BR/EDR Controller, it shall return the ACL Connection Already Exists (0x0B) error code. If the LT_ADDR indicated in the LT_ADDR parameter is out of range, the controller shall return the Invalid HCI Command Parameters (0x12) error code. If the command succeeds, then the reserved LT_ADDR shall be used when issuing subsequent Set Connectionless Slave Broadcast Data and Set Connectionless Slave Broadcast commands. To ensure that the reserved LT_ADDR is not already allocated, it is recommended that this command be issued at some point after HCI_Reset is issued but before page scanning is enabled or paging is initiated." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava Signed-off-by: Marcel Holtmann --- diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index d7fd825ed2ce..4d88809da3f6 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -839,6 +839,15 @@ struct hci_cp_write_le_host_supported { __u8 simul; } __packed; +#define HCI_OP_SET_RESERVED_LT_ADDR 0x0c74 +struct hci_cp_set_reserved_lt_addr { + __u8 lt_addr; +} __packed; +struct hci_rp_set_reserved_lt_addr { + __u8 status; + __u8 lt_addr; +} __packed; + #define HCI_OP_READ_SYNC_TRAIN_PARAMS 0x0c77 #define HCI_OP_READ_LOCAL_VERSION 0x1001