From: Robert Baldyga Date: Thu, 21 Nov 2013 12:49:18 +0000 (+0100) Subject: usb: gadget: s3c-hsotg: fix disconnect handling X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d18f7116a5ddb8263fe62b05ad63e5ceb5875791;p=linux-beck.git usb: gadget: s3c-hsotg: fix disconnect handling This patch moves s3c_hsotg_disconnect function call from USBSusp interrupt handler to SET_ADDRESS request handler. It's because disconnected state can't be detected directly, because this hardware doesn't support Disconnected interrupt for device mode. For both Suspend and Disconnect events there is one interrupt USBSusp, but calling s3c_hsotg_disconnect from this interrupt handler causes config reset in composite layer, which is not undesirable for Suspended state. For this reason s3c_hsotg_disconnect is called from SET_ADDRESS request handler, which occurs always after disconnection, so we do disconnect immediately before we are connected again. It's probably only way we can do handle disconnection correctly. Signed-off-by: Robert Baldyga Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 56fad76baa53..e20bc109fdd7 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1180,6 +1180,7 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, } static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg); +static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg); /** * s3c_hsotg_process_control - process a control request @@ -1221,6 +1222,7 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { switch (ctrl->bRequest) { case USB_REQ_SET_ADDRESS: + s3c_hsotg_disconnect(hsotg); dcfg = readl(hsotg->regs + DCFG); dcfg &= ~DCFG_DevAddr_MASK; dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT; @@ -2537,7 +2539,6 @@ irq_retry: writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS); call_gadget(hsotg, suspend); - s3c_hsotg_disconnect(hsotg); } if (gintsts & GINTSTS_WkUpInt) {