From: Anton Tikhomirov Date: Wed, 15 Feb 2012 08:04:56 +0000 (+0900) Subject: usb: dwc3: Add Exynos Specific Glue layer X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d28a9689c93195d39f91f35a9519876688605b65;p=mv-sheeva.git usb: dwc3: Add Exynos Specific Glue layer Adds Exynos Specific Glue layer to support USB peripherals on Samsung Exynos5 chips. [ balbi@ti.com : prevent compilation of Exynos glue layer on platforms which don't provide clk API implementation ] Signed-off-by: Anton Tikhomirov Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index 900ae74357f..d441fe4c180 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -28,6 +28,19 @@ endif obj-$(CONFIG_USB_DWC3) += dwc3-omap.o +## +# REVISIT Samsung Exynos platform needs the clk API which isn't +# defined on all architectures. If we allow dwc3-exynos.c compile +# always we will fail the linking phase on those architectures +# which don't provide clk api implementation and that's unnaceptable. +# +# When Samsung's platform start supporting pm_runtime, this check +# for HAVE_CLK should be removed. +## +ifneq ($(CONFIG_HAVE_CLK),) + obj-$(CONFIG_USB_DWC3) += dwc3-exynos.o +endif + ifneq ($(CONFIG_PCI),) obj-$(CONFIG_USB_DWC3) += dwc3-pci.o endif diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c new file mode 100644 index 00000000000..d1903019808 --- /dev/null +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -0,0 +1,151 @@ +/** + * dwc3-exynos.c - Samsung EXYNOS DWC3 Specific Glue layer + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Anton Tikhomirov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" + +struct dwc3_exynos { + struct platform_device *dwc3; + struct device *dev; + + struct clk *clk; +}; + +static int __devinit dwc3_exynos_probe(struct platform_device *pdev) +{ + struct dwc3_exynos_data *pdata = pdev->dev.platform_data; + struct platform_device *dwc3; + struct dwc3_exynos *exynos; + struct clk *clk; + + int devid; + int ret = -ENOMEM; + + exynos = kzalloc(sizeof(*exynos), GFP_KERNEL); + if (!exynos) { + dev_err(&pdev->dev, "not enough memory\n"); + goto err0; + } + + platform_set_drvdata(pdev, exynos); + + devid = dwc3_get_device_id(); + if (devid < 0) + goto err1; + + dwc3 = platform_device_alloc("dwc3", devid); + if (!dwc3) { + dev_err(&pdev->dev, "couldn't allocate dwc3 device\n"); + goto err2; + } + + clk = clk_get(&pdev->dev, "usbdrd30"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "couldn't get clock\n"); + ret = -EINVAL; + goto err3; + } + + dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask); + + dwc3->dev.parent = &pdev->dev; + dwc3->dev.dma_mask = pdev->dev.dma_mask; + dwc3->dev.dma_parms = pdev->dev.dma_parms; + exynos->dwc3 = dwc3; + exynos->dev = &pdev->dev; + exynos->clk = clk; + + clk_enable(exynos->clk); + + /* PHY initialization */ + if (!pdata) { + dev_dbg(&pdev->dev, "missing platform data\n"); + } else { + if (pdata->phy_init) + pdata->phy_init(pdev, pdata->phy_type); + } + + ret = platform_device_add_resources(dwc3, pdev->resource, + pdev->num_resources); + if (ret) { + dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n"); + goto err4; + } + + ret = platform_device_add(dwc3); + if (ret) { + dev_err(&pdev->dev, "failed to register dwc3 device\n"); + goto err4; + } + + return 0; + +err4: + if (pdata && pdata->phy_exit) + pdata->phy_exit(pdev, pdata->phy_type); + + clk_disable(clk); + clk_put(clk); +err3: + platform_device_put(dwc3); +err2: + dwc3_put_device_id(devid); +err1: + kfree(exynos); +err0: + return ret; +} + +static int __devexit dwc3_exynos_remove(struct platform_device *pdev) +{ + struct dwc3_exynos *exynos = platform_get_drvdata(pdev); + struct dwc3_exynos_data *pdata = pdev->dev.platform_data; + + platform_device_unregister(exynos->dwc3); + + dwc3_put_device_id(exynos->dwc3->id); + + if (pdata && pdata->phy_exit) + pdata->phy_exit(pdev, pdata->phy_type); + + clk_disable(exynos->clk); + clk_put(exynos->clk); + + kfree(exynos); + + return 0; +} + +static struct platform_driver dwc3_exynos_driver = { + .probe = dwc3_exynos_probe, + .remove = __devexit_p(dwc3_exynos_remove), + .driver = { + .name = "exynos-dwc3", + }, +}; + +module_platform_driver(dwc3_exynos_driver); + +MODULE_ALIAS("platform:exynos-dwc3"); +MODULE_AUTHOR("Anton Tikhomirov "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("DesignWare USB3 EXYNOS Glue Layer"); diff --git a/include/linux/platform_data/dwc3-exynos.h b/include/linux/platform_data/dwc3-exynos.h new file mode 100644 index 00000000000..5eb7da9b377 --- /dev/null +++ b/include/linux/platform_data/dwc3-exynos.h @@ -0,0 +1,24 @@ +/** + * dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Anton Tikhomirov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _DWC3_EXYNOS_H_ +#define _DWC3_EXYNOS_H_ + +struct dwc3_exynos_data { + int phy_type; + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +#endif /* _DWC3_EXYNOS_H_ */