From: H Hartley Sweeten Date: Fri, 1 May 2015 21:58:31 +0000 (-0700) Subject: staging: comedi: ni_stc.h: tidy up M_Offset_* values X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d2dde226094cb4d6e3116da09bf2d9803785683d;p=linux-beck.git staging: comedi: ni_stc.h: tidy up M_Offset_* values For aesthetics, define the M_Offset_* values instead of using an enum. Convert the inline helpers used to get some of the M-Series register offsets into macros. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h index e9cabbde0ca1..2efd1ec84cc5 100644 --- a/drivers/staging/comedi/drivers/ni_stc.h +++ b/drivers/staging/comedi/drivers/ni_stc.h @@ -920,109 +920,58 @@ enum ni_reg_type { static const struct comedi_lrange range_ni_E_ao_ext; -enum m_series_register_offsets { - M_Offset_CDIO_DMA_Select = 0x7, /* write */ - M_Offset_SCXI_Status = 0x7, /* read */ - M_Offset_AI_AO_Select = 0x9, /* write, same offset as e-series */ - M_Offset_G0_G1_Select = 0xb, /* write, same offset as e-series */ - M_Offset_Misc_Command = 0xf, - M_Offset_SCXI_Serial_Data_Out = 0x11, - M_Offset_SCXI_Control = 0x13, - M_Offset_SCXI_Output_Enable = 0x15, - M_Offset_AI_FIFO_Data = 0x1c, - M_Offset_Static_Digital_Output = 0x24, /* write */ - M_Offset_Static_Digital_Input = 0x24, /* read */ - M_Offset_DIO_Direction = 0x28, - M_Offset_Cal_PWM = 0x40, - M_Offset_AI_Config_FIFO_Data = 0x5e, - M_Offset_Interrupt_C_Enable = 0x88, /* write */ - M_Offset_Interrupt_C_Status = 0x88, /* read */ - M_Offset_Analog_Trigger_Control = 0x8c, - M_Offset_AO_Serial_Interrupt_Enable = 0xa0, - M_Offset_AO_Serial_Interrupt_Ack = 0xa1, /* write */ - M_Offset_AO_Serial_Interrupt_Status = 0xa1, /* read */ - M_Offset_AO_Calibration = 0xa3, - M_Offset_AO_FIFO_Data = 0xa4, - M_Offset_PFI_Filter = 0xb0, - M_Offset_RTSI_Filter = 0xb4, - M_Offset_SCXI_Legacy_Compatibility = 0xbc, - M_Offset_RTSI_Shared_MUX = 0x1a2, - M_Offset_Clock_and_Fout2 = 0x1c4, - M_Offset_PLL_Control = 0x1c6, - M_Offset_PLL_Status = 0x1c8, - M_Offset_PFI_Output_Select_1 = 0x1d0, - M_Offset_PFI_Output_Select_2 = 0x1d2, - M_Offset_PFI_Output_Select_3 = 0x1d4, - M_Offset_PFI_Output_Select_4 = 0x1d6, - M_Offset_PFI_Output_Select_5 = 0x1d8, - M_Offset_PFI_Output_Select_6 = 0x1da, - M_Offset_PFI_DI = 0x1dc, - M_Offset_PFI_DO = 0x1de, - M_Offset_AI_Config_FIFO_Bypass = 0x218, - M_Offset_SCXI_DIO_Enable = 0x21c, - M_Offset_CDI_FIFO_Data = 0x220, /* read */ - M_Offset_CDO_FIFO_Data = 0x220, /* write */ - M_Offset_CDIO_Status = 0x224, /* read */ - M_Offset_CDIO_Command = 0x224, /* write */ - M_Offset_CDI_Mode = 0x228, - M_Offset_CDO_Mode = 0x22c, - M_Offset_CDI_Mask_Enable = 0x230, - M_Offset_CDO_Mask_Enable = 0x234, -}; -static inline int M_Offset_AO_Waveform_Order(int channel) -{ - return 0xc2 + 0x4 * channel; -}; - -static inline int M_Offset_AO_Config_Bank(int channel) -{ - return 0xc3 + 0x4 * channel; -}; - -static inline int M_Offset_DAC_Direct_Data(int channel) -{ - return 0xc0 + 0x4 * channel; -} - -static inline int M_Offset_Gen_PWM(int channel) -{ - return 0x44 + 0x2 * channel; -} - -static inline int M_Offset_Static_AI_Control(int i) -{ - int offset[] = { - 0x64, - 0x261, - 0x262, - 0x263, - }; - if (((unsigned)i) >= ARRAY_SIZE(offset)) { - pr_err("%s: invalid channel=%i\n", __func__, i); - return offset[0]; - } - return offset[i]; -}; - -static inline int M_Offset_AO_Reference_Attenuation(int channel) -{ - int offset[] = { - 0x264, - 0x265, - 0x266, - 0x267 - }; - if (((unsigned)channel) >= ARRAY_SIZE(offset)) { - pr_err("%s: invalid channel=%i\n", __func__, channel); - return offset[0]; - } - return offset[channel]; -}; - -static inline unsigned M_Offset_PFI_Output_Select(unsigned n) -{ - return M_Offset_PFI_Output_Select_1 + (n * 2); -} +/* + * M-Series specific registers not handled by the DAQ-STC and GPCT register + * remapping. + */ +#define M_Offset_CDIO_DMA_Select 0x007 +#define M_Offset_SCXI_Status 0x007 +#define M_Offset_AI_AO_Select 0x009 +#define M_Offset_G0_G1_Select 0x00b +#define M_Offset_Misc_Command 0x00f +#define M_Offset_SCXI_Serial_Data_Out 0x011 +#define M_Offset_SCXI_Control 0x013 +#define M_Offset_SCXI_Output_Enable 0x015 +#define M_Offset_AI_FIFO_Data 0x01c +#define M_Offset_Static_Digital_Output 0x024 +#define M_Offset_Static_Digital_Input 0x024 +#define M_Offset_DIO_Direction 0x028 +#define M_Offset_Cal_PWM 0x040 +#define M_Offset_Gen_PWM(x) (0x044 + ((x) * 2)) +#define M_Offset_AI_Config_FIFO_Data 0x05e +#define M_Offset_Interrupt_C_Enable 0x088 +#define M_Offset_Interrupt_C_Status 0x088 +#define M_Offset_Analog_Trigger_Control 0x08c +#define M_Offset_AO_Serial_Interrupt_Enable 0x0a0 +#define M_Offset_AO_Serial_Interrupt_Ack 0x0a1 +#define M_Offset_AO_Serial_Interrupt_Status 0x0a1 +#define M_Offset_AO_Calibration 0x0a3 +#define M_Offset_AO_FIFO_Data 0x0a4 +#define M_Offset_PFI_Filter 0x0b0 +#define M_Offset_RTSI_Filter 0x0b4 +#define M_Offset_SCXI_Legacy_Compatibility 0x0bc +#define M_Offset_DAC_Direct_Data(x) (0x0c0 + ((x) * 4)) +#define M_Offset_AO_Waveform_Order(x) (0x0c2 + ((x) * 4)) +#define M_Offset_AO_Config_Bank(x) (0x0c3 + ((x) * 4)) +#define M_Offset_RTSI_Shared_MUX 0x1a2 +#define M_Offset_Clock_and_Fout2 0x1c4 +#define M_Offset_PLL_Control 0x1c6 +#define M_Offset_PLL_Status 0x1c8 +#define M_Offset_PFI_Output_Select(x) (0x1d0 + ((x) * 2)) +#define M_Offset_PFI_DI 0x1dc +#define M_Offset_PFI_DO 0x1de +#define M_Offset_AI_Config_FIFO_Bypass 0x218 +#define M_Offset_SCXI_DIO_Enable 0x21c +#define M_Offset_CDI_FIFO_Data 0x220 +#define M_Offset_CDO_FIFO_Data 0x220 +#define M_Offset_CDIO_Status 0x224 +#define M_Offset_CDIO_Command 0x224 +#define M_Offset_CDI_Mode 0x228 +#define M_Offset_CDO_Mode 0x22c +#define M_Offset_CDI_Mask_Enable 0x230 +#define M_Offset_CDO_Mask_Enable 0x234 +#define M_Offset_Static_AI_Control(x) ((x) ? (0x260 + (x)) : 0x064) +#define M_Offset_AO_Reference_Attenuation(x) (0x264 + (x)) enum MSeries_AI_Config_FIFO_Data_Bits { MSeries_AI_Config_Channel_Type_Mask = 0x7 << 6,