From: Andy Shevchenko Date: Thu, 8 May 2014 09:01:48 +0000 (+0300) Subject: dmaengine: dw: enable clock before access X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d2f78e95e42a9130002c76f1a1f76e657a4b4004;p=linux-beck.git dmaengine: dw: enable clock before access hclk signal is a bus clock. So, it means we have to have it enabled during access to the DMA controller. This patch makes sure that we enable clock before access to the device, though it currently works on Intel hardware. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul --- diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index 7a740769c2fa..009dc62f9437 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -1493,6 +1493,11 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) dw->regs = chip->regs; chip->dw = dw; + dw->clk = devm_clk_get(chip->dev, "hclk"); + if (IS_ERR(dw->clk)) + return PTR_ERR(dw->clk); + clk_prepare_enable(dw->clk); + dw_params = dma_read_byaddr(chip->regs, DW_PARAMS); autocfg = dw_params >> DW_PARAMS_EN & 0x1; @@ -1520,11 +1525,6 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) if (!dw->chan) return -ENOMEM; - dw->clk = devm_clk_get(chip->dev, "hclk"); - if (IS_ERR(dw->clk)) - return PTR_ERR(dw->clk); - clk_prepare_enable(dw->clk); - /* Get hardware configuration parameters */ if (autocfg) { max_blk_size = dma_readl(dw, MAX_BLK_SIZE);