From: Alexander Shiyan Date: Sun, 15 Dec 2013 09:36:51 +0000 (+0400) Subject: regmap: irq: Allow using zero value for ack_base X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d3233433356aa1965b60b08ee61465b20e50474b;p=linux-beck.git regmap: irq: Allow using zero value for ack_base In some cases, clear interrupt register may be at address 0. This patch allows to use such configurations by adding additional configuration bit to indicate this. [With doc fix from Levente Kurusa -- broonie] Signed-off-by: Alexander Shiyan Signed-off-by: Mark Brown --- diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index 763c60d3d277..82692068d3cb 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -113,7 +113,7 @@ static void regmap_irq_sync_unlock(struct irq_data *data) * OR if there is masked interrupt which hasn't been Acked, * it'll be ignored in irq handler, then may introduce irq storm */ - if (d->mask_buf[i] && d->chip->ack_base) { + if (d->mask_buf[i] && (d->chip->ack_base || d->chip->use_ack)) { reg = d->chip->ack_base + (i * map->reg_stride * d->irq_reg_stride); ret = regmap_write(map, reg, d->mask_buf[i]); @@ -271,7 +271,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d) for (i = 0; i < data->chip->num_regs; i++) { data->status_buf[i] &= ~data->mask_buf[i]; - if (data->status_buf[i] && chip->ack_base) { + if (data->status_buf[i] && (chip->ack_base || chip->use_ack)) { reg = chip->ack_base + (i * map->reg_stride * data->irq_reg_stride); ret = regmap_write(map, reg, data->status_buf[i]); @@ -448,7 +448,7 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, goto err_alloc; } - if (d->status_buf[i] && chip->ack_base) { + if (d->status_buf[i] && (chip->ack_base || chip->use_ack)) { reg = chip->ack_base + (i * map->reg_stride * d->irq_reg_stride); ret = regmap_write(map, reg, diff --git a/include/linux/regmap.h b/include/linux/regmap.h index e55907804d39..c9e5fb197eb6 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -497,11 +497,13 @@ struct regmap_irq { * * @status_base: Base status register address. * @mask_base: Base mask register address. - * @ack_base: Base ack address. If zero then the chip is clear on read. + * @ack_base: Base ack address. If zero then the chip is clear on read. + * Using zero value is possible with @use_ack bit. * @wake_base: Base address for wake enables. If zero unsupported. * @irq_reg_stride: Stride to use for chips where registers are not contiguous. * @init_ack_masked: Ack all masked interrupts once during initalization. * @mask_invert: Inverted mask register: cleared bits are masked out. + * @use_ack: Use @ack register even if it is zero. * @wake_invert: Inverted wake register: cleared bits are wake enabled. * @runtime_pm: Hold a runtime PM lock on the device when accessing it. * @@ -520,6 +522,7 @@ struct regmap_irq_chip { unsigned int irq_reg_stride; bool init_ack_masked:1; bool mask_invert:1; + bool use_ack:1; bool wake_invert:1; bool runtime_pm:1;