From: Emil Tantilov Date: Sat, 7 Nov 2015 00:34:33 +0000 (-0800) Subject: ixgbe: do not report 2.5 Gbps as supported X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d3428001c58dce10af624e889667c7862320390a;p=linux-beck.git ixgbe: do not report 2.5 Gbps as supported Some X550 devices can connect at 2.5Gbps during fail-over, but only with certain link partners. Also setting the advertised speed will not work so we do not report it as supported to avoid confusion. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index d681273bd39d..1ed4c9add00d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -166,8 +166,6 @@ static int ixgbe_get_settings(struct net_device *netdev, /* set the supported link speeds */ if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) ecmd->supported |= SUPPORTED_10000baseT_Full; - if (supported_link & IXGBE_LINK_SPEED_2_5GB_FULL) - ecmd->supported |= SUPPORTED_2500baseX_Full; if (supported_link & IXGBE_LINK_SPEED_1GB_FULL) ecmd->supported |= SUPPORTED_1000baseT_Full; if (supported_link & IXGBE_LINK_SPEED_100_FULL) @@ -179,8 +177,6 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= ADVERTISED_100baseT_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) ecmd->advertising |= ADVERTISED_10000baseT_Full; - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL) - ecmd->advertising |= ADVERTISED_2500baseX_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) ecmd->advertising |= ADVERTISED_1000baseT_Full; } else {