From: Roger Quadros <rogerq@ti.com>
Date: Fri, 6 Mar 2015 15:10:05 +0000 (+0200)
Subject: ARM: dts: omap3-beagle: Add NAND device
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d37530a0fc13b860f3b4ef88fbddff69fac52fc0;p=linux-beck.git

ARM: dts: omap3-beagle: Add NAND device

The beagle board contains a 16-bit NAND device connected to
chip select 0 of the GPMC controller.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index c792391ef090..bf285023d62c 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -379,3 +379,55 @@
 		};
 	};
 };
+
+&gpmc {
+	status = "ok";
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0 space, 16MB */
+
+	/* Chip select 0 */
+	nand@0,0 {
+		reg = <0 0 4>;		/* NAND I/O window, 4 bytes */
+		interrupts = <20>;
+		ti,nand-ecc-opt = "ham1";
+		nand-bus-width = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpmc,device-width = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <36>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <24>;
+		gpmc,adv-wr-off-ns = <36>;
+		gpmc,oe-on-ns = <6>;
+		gpmc,oe-off-ns = <48>;
+		gpmc,we-on-ns = <6>;
+		gpmc,we-off-ns = <30>;
+		gpmc,rd-cycle-ns = <72>;
+		gpmc,wr-cycle-ns = <72>;
+		gpmc,access-ns = <54>;
+		gpmc,wr-access-ns = <30>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+		partition@1c0000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+};