From: Ville Syrjälä Date: Tue, 20 May 2014 14:20:05 +0000 (+0300) Subject: drm/i915: Re-enable vblank irqs for already active pipes X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d3eaf8843da6c3aa0d6b5b480820382c7bd1a89d;p=linux-beck.git drm/i915: Re-enable vblank irqs for already active pipes If a pipe is already active when we init/resume there might not be a full modeset afterwards so drm_vblank_on() may not get called. In such a case if someone is holding a vblank reference across a suspend/resume cycle drm_vblank_get() called after resuming won't re-enable the vblank interrupts. So in order to make sure vblank interrupts get re-enabled post-resume, call drm_vblank_on() in intel_sanitize_crtc() if the crtc is already active. v2: Also drm_vblank_off() if the pipe got disabled magically Signed-off-by: Ville Syrjälä Testecase: igt/kms_flip/vblank-vs-suspend Tested-by: Daniel Vetter Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5f803f436872..6c5db7c8caf4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11778,6 +11778,12 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) reg = PIPECONF(crtc->config.cpu_transcoder); I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); + /* restore vblank interrupts to correct state */ + if (crtc->active) + drm_vblank_on(dev, crtc->pipe); + else + drm_vblank_off(dev, crtc->pipe); + /* We need to sanitize the plane -> pipe mapping first because this will * disable the crtc (and hence change the state) if it is wrong. Note * that gen4+ has a fixed plane -> pipe mapping. */