From: Troy Kisky <troy.kisky@boundarydevices.com>
Date: Fri, 20 Dec 2013 18:47:12 +0000 (-0700)
Subject: ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.
X-Git-Tag: next-20140106~108^2~10
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d4c11f4efe69755fe9601b65b228298fda397a75;p=karo-tx-linux.git

ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.

This works around a hardware bug.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---

diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 26fa0e57f4dc..088b0d2e4d1a 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -44,6 +44,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
 };
 
@@ -77,7 +79,7 @@
 		};
 
 		pinctrl_enet: enetgrp {
-			fsl,pins = <MX6QDL_ENET_PINGRP2>;
+			fsl,pins = <MX6QDL_ENET_PINGRP2_GPIO6>;
 		};
 
 		pinctrl_gpmi_nand: gpminandgrp {