From: Boris BREZILLON Date: Fri, 11 Oct 2013 12:43:31 +0000 (+0200) Subject: ARM: at91: prepare sama5 dt boards transition to common clk X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d4d24c1b4f74e055905db6e677a2ba05f55de30a;p=linux-beck.git ARM: at91: prepare sama5 dt boards transition to common clk This patch prepare the transition to common clk for sama5 dt boards by replacing the timer init callback. Clocks registration cannot be done in early init callback (as formerly done by the old clk implementation) because it requires dynamic allocation which is not ready yet during early init. In the other hand, at91 clocks must be registered before at91sam926x_pit_init is called because PIT (Periodic Interval Timer) driver request the master clk (mck). A new function (at91sama5_dt_timer_init) is created to fullfil these needs. This function registers all at91 clks using the dt definition before calling the PIT init function. The device tree clock registration is enabled only if common clk is selected. Else the old clk registration is been done during at91_dt_initialize call. Signed-off-by: Boris BREZILLON Signed-off-by: Nicolas Ferre --- diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index bf00d15d954d..075ec0576ada 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -26,6 +27,13 @@ #include "at91_aic.h" #include "generic.h" +static void __init sama5_dt_timer_init(void) +{ +#if defined(CONFIG_COMMON_CLK) + of_clk_init(NULL); +#endif + at91sam926x_pit_init(); +} static const struct of_device_id irq_of_match[] __initconst = { @@ -72,7 +80,7 @@ static const char *sama5_dt_board_compat[] __initdata = { DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = sama5_dt_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic5_handle_irq, .init_early = at91_dt_initialize,