From: Yakir Yang Date: Tue, 28 Jun 2016 04:51:18 +0000 (+0800) Subject: ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d4da51213a2ce337cb98a468886d5b0bc1e45bcc;p=linux-beck.git ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb The default eDP panel on RK3288 EVB board is LG LP079QX1-SP0V TFT LCD, we haven't declared the panel regulator in the 'panel-simple' device node here, so the specific board like ACT8846 / RK8080 need to support the panel power supply. Signed-off-by: Yakir Yang Signed-off-by: Heiko Stuebner --- diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 963365d12208..d59208b5eb6c 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -48,7 +48,7 @@ reg = <0x0 0x80000000>; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; brightness-levels = < 0 1 2 3 4 5 6 7 @@ -97,6 +97,21 @@ #clock-cells = <0>; }; + panel: panel { + compatible ="lg,lp079qx1-sp0v", "simple-panel"; + backlight = <&backlight>; + enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lcd_cs>; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat; @@ -170,6 +185,28 @@ cpu0-supply = <&vdd_cpu>; }; +&edp { + force-hpd; + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&edp_phy { + status = "okay"; +}; + &emmc { bus-width = <8>; cap-mmc-highspeed; @@ -280,6 +317,12 @@ }; }; + lcd { + lcd_cs: lcd-cs { + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = ;