From: Bartlomiej Zolnierkiewicz Date: Fri, 1 Feb 2008 22:09:29 +0000 (+0100) Subject: ide-{floppy,tape}: remove debug code for dumping identify data X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d554336514a63342c2e4b06b4287ad93c112b00f;p=linux-beck.git ide-{floppy,tape}: remove debug code for dumping identify data IDE core supports dumping raw identify data in hdparm friendly format now so verbose identify dumping in ide-{floppy,tape}.c device drivers (done iff IDE{FLOPPY,TAPE}_DEBUG_INFO is defined to '1' and it is '0' by default) is no longer nedeed. Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index ff8232ef9659..cf48b4a46d6d 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1658,7 +1658,6 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) { struct idefloppy_id_gcw gcw; #if IDEFLOPPY_DEBUG_INFO - u16 mask,i; char buffer[80]; #endif /* IDEFLOPPY_DEBUG_INFO */ @@ -1705,55 +1704,6 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) default: sprintf(buffer, "Reserved");break; } printk(KERN_INFO "Command Packet Size: %s\n", buffer); - printk(KERN_INFO "Model: %.40s\n",id->model); - printk(KERN_INFO "Firmware Revision: %.8s\n",id->fw_rev); - printk(KERN_INFO "Serial Number: %.20s\n",id->serial_no); - printk(KERN_INFO "Write buffer size(?): %d bytes\n",id->buf_size*512); - printk(KERN_INFO "DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n"); - printk(KERN_INFO "LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n"); - printk(KERN_INFO "IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n"); - printk(KERN_INFO "IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n"); - printk(KERN_INFO "ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n"); - printk(KERN_INFO "PIO Cycle Timing Category: %d\n",id->tPIO); - printk(KERN_INFO "DMA Cycle Timing Category: %d\n",id->tDMA); - printk(KERN_INFO "Single Word DMA supported modes:\n"); - for (i=0,mask=1;i<8;i++,mask=mask << 1) { - if (id->dma_1word & mask) - printk(KERN_INFO " Mode %d%s\n", i, - (id->dma_1word & (mask << 8)) ? " (active)" : ""); - } - printk(KERN_INFO "Multi Word DMA supported modes:\n"); - for (i=0,mask=1;i<8;i++,mask=mask << 1) { - if (id->dma_mword & mask) - printk(KERN_INFO " Mode %d%s\n", i, - (id->dma_mword & (mask << 8)) ? " (active)" : ""); - } - if (id->field_valid & 0x0002) { - printk(KERN_INFO "Enhanced PIO Modes: %s\n", - id->eide_pio_modes & 1 ? "Mode 3":"None"); - if (id->eide_dma_min == 0) - sprintf(buffer, "Not supported"); - else - sprintf(buffer, "%d ns",id->eide_dma_min); - printk(KERN_INFO "Minimum Multi-word DMA cycle per word: %s\n", buffer); - if (id->eide_dma_time == 0) - sprintf(buffer, "Not supported"); - else - sprintf(buffer, "%d ns",id->eide_dma_time); - printk(KERN_INFO "Manufacturer\'s Recommended Multi-word cycle: %s\n", buffer); - if (id->eide_pio == 0) - sprintf(buffer, "Not supported"); - else - sprintf(buffer, "%d ns",id->eide_pio); - printk(KERN_INFO "Minimum PIO cycle without IORDY: %s\n", - buffer); - if (id->eide_pio_iordy == 0) - sprintf(buffer, "Not supported"); - else - sprintf(buffer, "%d ns",id->eide_pio_iordy); - printk(KERN_INFO "Minimum PIO cycle with IORDY: %s\n", buffer); - } else - printk(KERN_INFO "According to the device, fields 64-70 are not valid.\n"); #endif /* IDEFLOPPY_DEBUG_INFO */ if (gcw.protocol != 2) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d71a584f0765..65037a8295a1 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -4291,9 +4291,6 @@ static int idetape_identify_device (ide_drive_t *drive) { struct idetape_id_gcw gcw; struct hd_driveid *id = drive->id; -#if IDETAPE_DEBUG_INFO - unsigned short mask,i; -#endif /* IDETAPE_DEBUG_INFO */ if (drive->id_read == 0) return 1; @@ -4333,62 +4330,6 @@ static int idetape_identify_device (ide_drive_t *drive) case 1: printk("16 bytes\n");break; default: printk("Reserved\n");break; } - printk(KERN_INFO "ide-tape: Model: %.40s\n",id->model); - printk(KERN_INFO "ide-tape: Firmware Revision: %.8s\n",id->fw_rev); - printk(KERN_INFO "ide-tape: Serial Number: %.20s\n",id->serial_no); - printk(KERN_INFO "ide-tape: Write buffer size: %d bytes\n",id->buf_size*512); - printk(KERN_INFO "ide-tape: DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n"); - printk(KERN_INFO "ide-tape: LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n"); - printk(KERN_INFO "ide-tape: IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n"); - printk(KERN_INFO "ide-tape: IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n"); - printk(KERN_INFO "ide-tape: ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n"); - printk(KERN_INFO "ide-tape: PIO Cycle Timing Category: %d\n",id->tPIO); - printk(KERN_INFO "ide-tape: DMA Cycle Timing Category: %d\n",id->tDMA); - printk(KERN_INFO "ide-tape: Single Word DMA supported modes: "); - for (i=0,mask=1;i<8;i++,mask=mask << 1) { - if (id->dma_1word & mask) - printk("%d ",i); - if (id->dma_1word & (mask << 8)) - printk("(active) "); - } - printk("\n"); - printk(KERN_INFO "ide-tape: Multi Word DMA supported modes: "); - for (i=0,mask=1;i<8;i++,mask=mask << 1) { - if (id->dma_mword & mask) - printk("%d ",i); - if (id->dma_mword & (mask << 8)) - printk("(active) "); - } - printk("\n"); - if (id->field_valid & 0x0002) { - printk(KERN_INFO "ide-tape: Enhanced PIO Modes: %s\n", - id->eide_pio_modes & 1 ? "Mode 3":"None"); - printk(KERN_INFO "ide-tape: Minimum Multi-word DMA cycle per word: "); - if (id->eide_dma_min == 0) - printk("Not supported\n"); - else - printk("%d ns\n",id->eide_dma_min); - - printk(KERN_INFO "ide-tape: Manufacturer\'s Recommended Multi-word cycle: "); - if (id->eide_dma_time == 0) - printk("Not supported\n"); - else - printk("%d ns\n",id->eide_dma_time); - - printk(KERN_INFO "ide-tape: Minimum PIO cycle without IORDY: "); - if (id->eide_pio == 0) - printk("Not supported\n"); - else - printk("%d ns\n",id->eide_pio); - - printk(KERN_INFO "ide-tape: Minimum PIO cycle with IORDY: "); - if (id->eide_pio_iordy == 0) - printk("Not supported\n"); - else - printk("%d ns\n",id->eide_pio_iordy); - - } else - printk(KERN_INFO "ide-tape: According to the device, fields 64-70 are not valid.\n"); #endif /* IDETAPE_DEBUG_INFO */ /* Check that we can support this device */