From: Jorgen Jonsson Date: Mon, 5 Nov 2012 15:09:31 +0000 (+0100) Subject: ARM: ux500: fixup magnetometer pins X-Git-Tag: next-20121113~24^2~7^2^2 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d792aebfa2daeb58ac6a669ce328ad05e9e4112c;p=karo-tx-linux.git ARM: ux500: fixup magnetometer pins GPIO31 and GPIO32 (CTS/RTS) are handled by the magnetometer and shall not simultaneously be controlled by UART2. Reported-by: Peter Nessrup Signed-off-by: Jorgen Jonsson Reviewed-by: Patrice Chotard Signed-off-by: Linus Walleij --- diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index f9ef2f44bcc2..5770ed06cddb 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -148,15 +148,10 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { * The setting on GPIO31 conflicts with magnetometer use on hrefv60 */ /* default state for UART2 */ - DB8500_MUX("u2ctsrts_c_1", "u2", "uart2"), - DB8500_PIN("GPIO31_V3", in_pu, "uart2"), /* CTS */ - DB8500_PIN("GPIO32_V2", out_hi, "uart2"), /* RTS */ DB8500_MUX("u2rxtx_c_1", "u2", "uart2"), DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */ DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */ /* Sleep state for UART2 */ - DB8500_PIN_SLEEP("GPIO31_V3", in_wkup_pdis, "uart2"), - DB8500_PIN_SLEEP("GPIO32_V2", out_hi_wkup_pdis, "uart2"), DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"), DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"), /*