From: Kevin Hilman Date: Mon, 18 Jul 2011 22:31:00 +0000 (-0700) Subject: OMAP3+: VC: use last nominal voltage setting to get current_vsel X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d7b0de2b46803062148345ae6a976c1e44a457b6;p=mv-sheeva.git OMAP3+: VC: use last nominal voltage setting to get current_vsel Instead of reading current vsel value from the VP's voltage register, just use current nominal voltage translated into vsel via the PMIC. Doing this allows VC bypass scaling to work even without a VP configured. Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index f53d1f5acce..21ffde86ad8 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -138,7 +138,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, volt_data = NULL; *target_vsel = voltdm->pmic->uv_to_vsel(target_volt); - *current_vsel = voltdm->read(vdd->vp_data->voltage); + *current_vsel = voltdm->pmic->uv_to_vsel(vdd->curr_volt); /* Setting the ON voltage to the new target voltage */ vc_cmdval = voltdm->read(vc->cmdval_reg);