From: Daniel Vetter Date: Thu, 25 Apr 2013 15:54:44 +0000 (+0200) Subject: drm/i915: use pipe_config for lvds dithering X-Git-Tag: next-20130521~50^2~101 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d8b322474941fa565ba5c58292ccc54be92cca41;p=karo-tx-linux.git drm/i915: use pipe_config for lvds dithering Up to now we've relied on the bios to get this right for us. Let's try out whether our code has improved a bit, since we should dither always when the output bpp doesn't match the plane bpp. - gen5+ should be fine, since we only use the bios hint as an upgrade. - gen4 changes, since here dithering is still controlled in the lvds register. - gen2/3 has implicit dithering depeding upon whether you use 2 or 3 lvds pairs (which makes sense, since it only supports 8bpc pipe outpu configurations). - hsw doesn't support lvds. v2: Remove redudant dither setting. v3: Completly drop reliance on dev_priv->lvds_dither. v4: Enable dithering on gen2/3 only when we have a 18bpp panel, since up-dithering to a 24bpp panel is not supported by the hw. Spotted by Ville. v5: Also only enable lvds port dithering on gen4 for 18bpp modes. In practice this only excludes dithering a 10bpc plane down for a 24bpp lvds panel. Not something we truly care about. Again noticed by Ville. v6: Actually git add. Cc: Ville Syrjälä Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 26acc421f0c6..38465f0e9710 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5146,8 +5146,7 @@ static int ironlake_get_refclk(struct drm_crtc *crtc) } static void ironlake_set_pipeconf(struct drm_crtc *crtc, - struct drm_display_mode *adjusted_mode, - bool dither) + struct drm_display_mode *adjusted_mode) { struct drm_i915_private *dev_priv = crtc->dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -5176,7 +5175,7 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc, } val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK); - if (dither) + if (intel_crtc->config.dither) val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP); val &= ~PIPECONF_INTERLACE_MASK; @@ -5259,8 +5258,7 @@ static void intel_set_pipe_csc(struct drm_crtc *crtc) } static void haswell_set_pipeconf(struct drm_crtc *crtc, - struct drm_display_mode *adjusted_mode, - bool dither) + struct drm_display_mode *adjusted_mode) { struct drm_i915_private *dev_priv = crtc->dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -5270,7 +5268,7 @@ static void haswell_set_pipeconf(struct drm_crtc *crtc, val = I915_READ(PIPECONF(cpu_transcoder)); val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK); - if (dither) + if (intel_crtc->config.dither) val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP); val &= ~PIPECONF_INTERLACE_MASK_HSW; @@ -5631,7 +5629,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, bool is_lvds = false; struct intel_encoder *encoder; int ret; - bool dither, fdi_config_ok; + bool fdi_config_ok; for_each_encoder_on_crtc(dev, crtc, encoder) { switch (encoder->type) { @@ -5666,11 +5664,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); - /* determine panel color depth */ - dither = intel_crtc->config.dither; - if (is_lvds && dev_priv->lvds_dither) - dither = true; - DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe_name(pipe)); drm_mode_debug_printmodeline(mode); @@ -5737,7 +5730,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc); - ironlake_set_pipeconf(crtc, adjusted_mode, dither); + ironlake_set_pipeconf(crtc, adjusted_mode); /* Set up the display plane register */ I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE); @@ -5814,7 +5807,6 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, bool is_cpu_edp = false; struct intel_encoder *encoder; int ret; - bool dither; for_each_encoder_on_crtc(dev, crtc, encoder) { switch (encoder->type) { @@ -5850,9 +5842,6 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); - /* determine panel color depth */ - dither = intel_crtc->config.dither; - DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe_name(pipe)); drm_mode_debug_printmodeline(mode); @@ -5866,7 +5855,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, if (intel_crtc->config.has_pch_encoder) ironlake_fdi_set_m_n(crtc); - haswell_set_pipeconf(crtc, adjusted_mode, dither); + haswell_set_pipeconf(crtc, adjusted_mode); intel_set_pipe_csc(crtc); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 3595c8204649..a5fe976364e1 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -213,6 +213,11 @@ struct intel_crtc_config { /* DP has a bunch of special case unfortunately, so mark the pipe * accordingly. */ bool has_dp_encoder; + + /* + * Enable dithering, used when the selected pipe bpp doesn't match the + * plane bpp. + */ bool dither; /* Controls for the clock computation, to override various stages. */ diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 563f5052fcfc..84085454b104 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -136,7 +136,10 @@ static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder) * special lvds dither control bit on pch-split platforms, dithering is * only controlled through the PIPECONF reg. */ if (INTEL_INFO(dev)->gen == 4) { - if (dev_priv->lvds_dither) + /* Bspec wording suggests that LVDS port dithering only exists + * for 18bpp panels. */ + if (intel_crtc->config.dither && + intel_crtc->config.pipe_bpp == 18) temp |= LVDS_ENABLE_DITHER; else temp &= ~LVDS_ENABLE_DITHER; @@ -335,7 +338,13 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder, DRM_DEBUG_KMS("forcing display bpp (was %d) to LVDS (%d)\n", pipe_config->pipe_bpp, lvds_bpp); pipe_config->pipe_bpp = lvds_bpp; + + /* Make sure pre-965 set dither correctly for 18bpp panels. */ + if (INTEL_INFO(dev)->gen < 4 && lvds_bpp == 18) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + } + /* * We have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode, @@ -470,10 +479,6 @@ out: pfit_pgm_ratios = 0; } - /* Make sure pre-965 set dither correctly */ - if (INTEL_INFO(dev)->gen < 4 && dev_priv->lvds_dither) - pfit_control |= PANEL_8TO6_DITHER_ENABLE; - if (pfit_control != lvds_encoder->pfit_control || pfit_pgm_ratios != lvds_encoder->pfit_pgm_ratios) { lvds_encoder->pfit_control = pfit_control;