From: Ezequiel Garcia Date: Thu, 7 Nov 2013 15:17:35 +0000 (-0300) Subject: ARM: mvebu: Enable NAND controller in Armada 370 Mirabox X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d8c552dddfbf;p=linux-beck.git ARM: mvebu: Enable NAND controller in Armada 370 Mirabox The Armada 370 Mirabox has a NAND flash, so enable it in the devicetree and add the partitions as prepared in the factory images. In order to skip the driver's custom device detection and use only ONFI detection, the "marvell,keep-config" parameter is used. This is needed because we have no support for setting the timings parameters yet. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 41457e5ff1a9..944e8785b308 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -139,6 +139,27 @@ reg = <0x25>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x400000>; + }; + partition@400000 { + label = "Linux"; + reg = <0x400000 0x400000>; + }; + partition@800000 { + label = "Filesystem"; + reg = <0x800000 0x3f800000>; + }; + }; }; }; };