From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Fri, 4 Dec 2015 21:58:07 +0000 (+0300)
Subject: ravb: read MAC address registers only once
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d96606389720fff450955e2b5c81a3d5974c465c;p=linux-beck.git

ravb: read MAC address registers only once

The code reading the MAHR/MALR registers in ravb_read_mac_address() is
terribly ineffective -- it reads  MAHR 4 times and MALR 2 times, while
it's enough to read each register only once. Use the local variables to
achieve that, somewhat beautifying the code while at it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index be019e769c83..1cf12264861c 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -115,12 +115,15 @@ static void ravb_read_mac_address(struct net_device *ndev, const u8 *mac)
 	if (mac) {
 		ether_addr_copy(ndev->dev_addr, mac);
 	} else {
-		ndev->dev_addr[0] = (ravb_read(ndev, MAHR) >> 24);
-		ndev->dev_addr[1] = (ravb_read(ndev, MAHR) >> 16) & 0xFF;
-		ndev->dev_addr[2] = (ravb_read(ndev, MAHR) >> 8) & 0xFF;
-		ndev->dev_addr[3] = (ravb_read(ndev, MAHR) >> 0) & 0xFF;
-		ndev->dev_addr[4] = (ravb_read(ndev, MALR) >> 8) & 0xFF;
-		ndev->dev_addr[5] = (ravb_read(ndev, MALR) >> 0) & 0xFF;
+		u32 mahr = ravb_read(ndev, MAHR);
+		u32 malr = ravb_read(ndev, MALR);
+
+		ndev->dev_addr[0] = (mahr >> 24) & 0xFF;
+		ndev->dev_addr[1] = (mahr >> 16) & 0xFF;
+		ndev->dev_addr[2] = (mahr >>  8) & 0xFF;
+		ndev->dev_addr[3] = (mahr >>  0) & 0xFF;
+		ndev->dev_addr[4] = (malr >>  8) & 0xFF;
+		ndev->dev_addr[5] = (malr >>  0) & 0xFF;
 	}
 }