From: Bryan Freed Date: Fri, 24 Jun 2011 20:40:47 +0000 (-0700) Subject: iio: light sensor: Add SMBUS support to the tsl2563 driver. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d9b42c01ae8d17fdf8d910a4255d18ed2ac22f90;p=linux-beck.git iio: light sensor: Add SMBUS support to the tsl2563 driver. This is so we can support it on x86 SMBUS adapters. Since i2c adapters which do not provide an smbus_xfer interface fall back to using their I2C master_xfer interface, all the i2c_master_send() calls in this driver are changed to i2c_smbus_*() calls. This will fail on an i2c adapter that implements a proper subset of (SMBUS_BYTE | SMBUS_BYTE_DATA | SMBUS_WORD_DATA), but I do not see that in any of our adapters today. This results in a few wrapper functions that provide little additional functionality, so remove them and call the smbus functions directly from the general driver code. Signed-off-by: Bryan Freed Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c index 98ea6afc5cc8..f25243b08472 100644 --- a/drivers/staging/iio/light/tsl2563.c +++ b/drivers/staging/iio/light/tsl2563.c @@ -137,37 +137,14 @@ struct tsl2563_chip { u32 data1; }; -static int tsl2563_write(struct i2c_client *client, u8 reg, u8 value) -{ - int ret; - u8 buf[2]; - - buf[0] = TSL2563_CMD | reg; - buf[1] = value; - - ret = i2c_master_send(client, buf, sizeof(buf)); - return (ret == sizeof(buf)) ? 0 : ret; -} - -static int tsl2563_read(struct i2c_client *client, u8 reg, void *buf, int len) -{ - int ret; - u8 cmd = TSL2563_CMD | reg; - - ret = i2c_master_send(client, &cmd, sizeof(cmd)); - if (ret != sizeof(cmd)) - return ret; - - return i2c_master_recv(client, buf, len); -} - static int tsl2563_set_power(struct tsl2563_chip *chip, int on) { struct i2c_client *client = chip->client; u8 cmd; cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF; - return tsl2563_write(client, TSL2563_REG_CTRL, cmd); + return i2c_smbus_write_byte_data(client, + TSL2563_CMD | TSL2563_REG_CTRL, cmd); } /* @@ -178,36 +155,40 @@ static int tsl2563_get_power(struct tsl2563_chip *chip) { struct i2c_client *client = chip->client; int ret; - u8 val; - ret = tsl2563_read(client, TSL2563_REG_CTRL, &val, sizeof(val)); - if (ret != sizeof(val)) + ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_CTRL); + if (ret < 0) return ret; - return (val & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON; + return (ret & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON; } static int tsl2563_configure(struct tsl2563_chip *chip) { int ret; - ret = tsl2563_write(chip->client, TSL2563_REG_TIMING, + ret = i2c_smbus_write_byte_data(chip->client, + TSL2563_CMD | TSL2563_REG_TIMING, chip->gainlevel->gaintime); if (ret) goto error_ret; - ret = tsl2563_write(chip->client, TSL2563_REG_HIGHLOW, + ret = i2c_smbus_write_byte_data(chip->client, + TSL2563_CMD | TSL2563_REG_HIGHLOW, chip->high_thres & 0xFF); if (ret) goto error_ret; - ret = tsl2563_write(chip->client, TSL2563_REG_HIGHHIGH, + ret = i2c_smbus_write_byte_data(chip->client, + TSL2563_CMD | TSL2563_REG_HIGHHIGH, (chip->high_thres >> 8) & 0xFF); if (ret) goto error_ret; - ret = tsl2563_write(chip->client, TSL2563_REG_LOWLOW, + ret = i2c_smbus_write_byte_data(chip->client, + TSL2563_CMD | TSL2563_REG_LOWLOW, chip->low_thres & 0xFF); if (ret) goto error_ret; - ret = tsl2563_write(chip->client, TSL2563_REG_LOWHIGH, + ret = i2c_smbus_write_byte_data(chip->client, + TSL2563_CMD | TSL2563_REG_LOWHIGH, (chip->low_thres >> 8) & 0xFF); /* Interrupt register is automatically written anyway if it is relevant so is not here */ @@ -242,8 +223,8 @@ static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id) struct i2c_client *client = chip->client; int ret; - ret = tsl2563_read(client, TSL2563_REG_ID, id, sizeof(*id)); - if (ret != sizeof(*id)) + ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_ID); + if (ret < 0) return ret; return 0; @@ -313,8 +294,9 @@ static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc) (adc > chip->gainlevel->max) ? chip->gainlevel++ : chip->gainlevel--; - tsl2563_write(client, TSL2563_REG_TIMING, - chip->gainlevel->gaintime); + i2c_smbus_write_byte_data(client, + TSL2563_CMD | TSL2563_REG_TIMING, + chip->gainlevel->gaintime); tsl2563_wait_adc(chip); tsl2563_wait_adc(chip); @@ -327,7 +309,6 @@ static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc) static int tsl2563_get_adc(struct tsl2563_chip *chip) { struct i2c_client *client = chip->client; - u8 buf0[2], buf1[2]; u16 adc0, adc1; int retry = 1; int ret = 0; @@ -350,19 +331,17 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip) } while (retry) { - ret = tsl2563_read(client, - TSL2563_REG_DATA0LOW, - buf0, sizeof(buf0)); - if (ret != sizeof(buf0)) + ret = i2c_smbus_read_word_data(client, + TSL2563_CMD | TSL2563_REG_DATA0LOW); + if (ret < 0) goto out; + adc0 = ret; - ret = tsl2563_read(client, TSL2563_REG_DATA1LOW, - buf1, sizeof(buf1)); - if (ret != sizeof(buf1)) + ret = i2c_smbus_read_word_data(client, + TSL2563_CMD | TSL2563_REG_DATA1LOW); + if (ret < 0) goto out; - - adc0 = (buf0[1] << 8) + buf0[0]; - adc1 = (buf1[1] << 8) + buf1[0]; + adc1 = ret; retry = tsl2563_adjust_gainlevel(chip, adc0); } @@ -593,11 +572,13 @@ static ssize_t tsl2563_write_thresh(struct iio_dev *indio_dev, else address = TSL2563_REG_LOWLOW; mutex_lock(&chip->lock); - ret = tsl2563_write(chip->client, address, val & 0xFF); + ret = i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | address, + val & 0xFF); if (ret) goto error_ret; - ret = tsl2563_write(chip->client, address + 1, - (val >> 8) & 0xFF); + ret = i2c_smbus_write_byte_data(chip->client, + TSL2563_CMD | (address + 1), + (val >> 8) & 0xFF); if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING) chip->high_thres = val; else @@ -613,7 +594,6 @@ static irqreturn_t tsl2563_event_handler(int irq, void *private) { struct iio_dev *dev_info = private; struct tsl2563_chip *chip = iio_priv(dev_info); - u8 cmd = TSL2563_CMD | TSL2563_CLEARINT; iio_push_event(dev_info, 0, IIO_UNMOD_EVENT_CODE(IIO_EV_CLASS_LIGHT, @@ -623,7 +603,7 @@ static irqreturn_t tsl2563_event_handler(int irq, void *private) iio_get_time_ns()); /* clear the interrupt and push the event */ - i2c_master_send(chip->client, &cmd, sizeof(cmd)); + i2c_smbus_write_byte(chip->client, TSL2563_CMD | TSL2563_CLEARINT); return IRQ_HANDLED; } @@ -648,13 +628,17 @@ static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev, if (ret) goto out; } - ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr); + ret = i2c_smbus_write_byte_data(chip->client, + TSL2563_CMD | TSL2563_REG_INT, + chip->intr); chip->int_enabled = true; } if (!state && (chip->intr & 0x30)) { chip->intr |= ~0x30; - ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr); + ret = i2c_smbus_write_byte_data(chip->client, + TSL2563_CMD | TSL2563_REG_INT, + chip->intr); chip->int_enabled = false; /* now the interrupt is not enabled, we can go to sleep */ schedule_delayed_work(&chip->poweroff_work, 5 * HZ); @@ -669,16 +653,15 @@ static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev, int event_code) { struct tsl2563_chip *chip = iio_priv(indio_dev); - u8 rxbuf; int ret; mutex_lock(&chip->lock); - ret = tsl2563_read(chip->client, TSL2563_REG_INT, - &rxbuf, sizeof(rxbuf)); + ret = i2c_smbus_read_byte_data(chip->client, + TSL2563_CMD | TSL2563_REG_INT); mutex_unlock(&chip->lock); if (ret < 0) goto error_ret; - ret = !!(rxbuf & 0x30); + ret = !!(ret & 0x30); error_ret: return ret; @@ -800,7 +783,8 @@ static int tsl2563_remove(struct i2c_client *client) cancel_delayed_work(&chip->poweroff_work); /* Ensure that interrupts are disabled - then flush any bottom halves */ chip->intr |= ~0x30; - tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr); + i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | TSL2563_REG_INT, + chip->intr); flush_scheduled_work(); tsl2563_set_power(chip, 0); if (client->irq)