From: Emil Tantilov Date: Thu, 18 May 2017 23:45:06 +0000 (-0700) Subject: ixgbe: fix incorrect status check X-Git-Tag: v4.13-rc1~157^2~331^2 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=d9c23ff80b9fdc1f2e8efeb5368adfd93493d7b4;p=karo-tx-linux.git ixgbe: fix incorrect status check Check for ret_val instead of !ret_val to allow the rest of the code to execute and configure the speed properly. Signed-off-by: Emil Tantilov Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index 80824fec15d2..72d84a065e34 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -1750,14 +1750,14 @@ ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed, if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) return 0; - if (!ret_val) + if (ret_val) return ret_val; /* Configure internal PHY for native SFI based on module type */ ret_val = hw->mac.ops.read_iosf_sb_reg(hw, IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, ®_phy_int); - if (!ret_val) + if (ret_val) return ret_val; reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA; @@ -1767,7 +1767,7 @@ ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed, ret_val = hw->mac.ops.write_iosf_sb_reg(hw, IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, reg_phy_int); - if (!ret_val) + if (ret_val) return ret_val; /* Setup SFI internal link. */ @@ -1798,7 +1798,7 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed, if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) return 0; - if (!ret_val) + if (ret_val) return ret_val; /* Configure internal PHY for KR/KX. */