From: Joerg Roedel Date: Wed, 26 Sep 2012 10:44:50 +0000 (+0200) Subject: x86, io_apic: Introduce eoi_ioapic_pin call-back X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=da165322dfb6cbc50042b1051f07b837a26f3bb8;p=linux-beck.git x86, io_apic: Introduce eoi_ioapic_pin call-back This callback replaces the old __eoi_ioapic_pin function which needs a special path for interrupt remapping. Signed-off-by: Joerg Roedel Acked-by: Sebastian Andrzej Siewior Reviewed-by: Konrad Rzeszutek Wilk --- diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 1838e884a5cc..459e50a424d1 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -161,6 +161,7 @@ extern void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg); extern void native_compose_msi_msg(struct pci_dev *pdev, unsigned int irq, unsigned int dest, struct msi_msg *msg, u8 hpet_id); +extern void native_eoi_ioapic_pin(int apic, int pin, int vector); int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr); extern int save_ioapic_entries(void); @@ -211,6 +212,9 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned { x86_io_apic_ops.modify(apic, reg, value); } + +extern void io_apic_eoi(unsigned int apic, unsigned int vector); + #else /* !CONFIG_X86_IO_APIC */ #define io_apic_assign_pci_irqs 0 @@ -246,6 +250,7 @@ static inline void disable_ioapic_support(void) { } #define native_ioapic_set_affinity NULL #define native_setup_ioapic_entry NULL #define native_compose_msi_msg NULL +#define native_eoi_ioapic_pin NULL #endif #endif /* _ASM_X86_IO_APIC_H */ diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index c9f87be84b0f..7669941cc9d2 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -212,6 +212,7 @@ struct x86_io_apic_ops { int (*setup_entry)(int irq, struct IO_APIC_route_entry *entry, unsigned int destination, int vector, struct io_apic_irq_attr *attr); + void (*eoi_ioapic_pin)(int apic, int pin, int vector); }; extern struct x86_init_ops x86_init; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index b832810d28f0..9ed796ccc32c 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -310,7 +310,7 @@ static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) + (mpc_ioapic_addr(idx) & ~PAGE_MASK); } -static inline void io_apic_eoi(unsigned int apic, unsigned int vector) +void io_apic_eoi(unsigned int apic, unsigned int vector) { struct io_apic __iomem *io_apic = io_apic_base(apic); writel(vector, &io_apic->eoi); @@ -557,19 +557,10 @@ static void unmask_ioapic_irq(struct irq_data *data) * Otherwise, we simulate the EOI message manually by changing the trigger * mode to edge and then back to level, with RTE being masked during this. */ -static void __eoi_ioapic_pin(int apic, int pin, int vector, struct irq_cfg *cfg) +void native_eoi_ioapic_pin(int apic, int pin, int vector) { if (mpc_ioapic_ver(apic) >= 0x20) { - /* - * Intr-remapping uses pin number as the virtual vector - * in the RTE. Actual vector is programmed in - * intr-remapping table entry. Hence for the io-apic - * EOI we use the pin number. - */ - if (cfg && irq_remapped(cfg)) - io_apic_eoi(apic, pin); - else - io_apic_eoi(apic, vector); + io_apic_eoi(apic, vector); } else { struct IO_APIC_route_entry entry, entry1; @@ -597,7 +588,8 @@ void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) raw_spin_lock_irqsave(&ioapic_lock, flags); for_each_irq_pin(entry, cfg->irq_2_pin) - __eoi_ioapic_pin(entry->apic, entry->pin, cfg->vector, cfg); + x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin, + cfg->vector); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } @@ -634,7 +626,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) } raw_spin_lock_irqsave(&ioapic_lock, flags); - __eoi_ioapic_pin(apic, pin, entry.vector, NULL); + x86_io_apic_ops.eoi_ioapic_pin(apic, pin, entry.vector); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index ee4a17c22569..d065d67c2672 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -129,4 +129,5 @@ struct x86_io_apic_ops x86_io_apic_ops = { .print_entries = native_io_apic_print_entries, .set_affinity = native_ioapic_set_affinity, .setup_entry = native_setup_ioapic_entry, + .eoi_ioapic_pin = native_eoi_ioapic_pin, }; diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c index 158091b345cb..849ce4ce500b 100644 --- a/drivers/iommu/irq_remapping.c +++ b/drivers/iommu/irq_remapping.c @@ -143,11 +143,23 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev, return do_setup_msix_irqs(dev, nvec); } +void eoi_ioapic_pin_remapped(int apic, int pin, int vector) +{ + /* + * Intr-remapping uses pin number as the virtual vector + * in the RTE. Actual vector is programmed in + * intr-remapping table entry. Hence for the io-apic + * EOI we use the pin number. + */ + io_apic_eoi(apic, pin); +} + static void __init irq_remapping_modify_x86_ops(void) { x86_io_apic_ops.disable = irq_remapping_disable_io_apic; x86_io_apic_ops.set_affinity = set_remapped_irq_affinity; x86_io_apic_ops.setup_entry = setup_ioapic_remapped_entry; + x86_io_apic_ops.eoi_ioapic_pin = eoi_ioapic_pin_remapped; x86_msi.setup_msi_irqs = irq_remapping_setup_msi_irqs; x86_msi.setup_hpet_msi = setup_hpet_msi_remapped; x86_msi.compose_msi_msg = compose_remapped_msi_msg;