From: Chris Metcalf Date: Thu, 29 Mar 2012 19:48:23 +0000 (-0400) Subject: arch/tile: support kexec() for tilegx X-Git-Tag: next-20120403~51^2~5 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=da483781bbffec97063bc86bb76aa68c27993773;p=karo-tx-linux.git arch/tile: support kexec() for tilegx Signed-off-by: Chris Metcalf --- diff --git a/arch/tile/include/asm/kexec.h b/arch/tile/include/asm/kexec.h index c11a6cc73bb8..fc98ccfc98ac 100644 --- a/arch/tile/include/asm/kexec.h +++ b/arch/tile/include/asm/kexec.h @@ -19,12 +19,24 @@ #include +#ifndef __tilegx__ /* Maximum physical address we can use pages from. */ #define KEXEC_SOURCE_MEMORY_LIMIT TASK_SIZE /* Maximum address we can reach in physical address mode. */ #define KEXEC_DESTINATION_MEMORY_LIMIT TASK_SIZE /* Maximum address we can use for the control code buffer. */ #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE +#else +/* We need to limit the memory below PGDIR_SIZE since + * we only setup page table for [0, PGDIR_SIZE) before final kexec. + */ +/* Maximum physical address we can use pages from. */ +#define KEXEC_SOURCE_MEMORY_LIMIT PGDIR_SIZE +/* Maximum address we can reach in physical address mode. */ +#define KEXEC_DESTINATION_MEMORY_LIMIT PGDIR_SIZE +/* Maximum address we can use for the control code buffer. */ +#define KEXEC_CONTROL_MEMORY_LIMIT PGDIR_SIZE +#endif #define KEXEC_CONTROL_PAGE_SIZE PAGE_SIZE diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile index d6261e4670fe..f19116df2c62 100644 --- a/arch/tile/kernel/Makefile +++ b/arch/tile/kernel/Makefile @@ -13,5 +13,5 @@ obj-$(CONFIG_COMPAT) += compat.o compat_signal.o obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel_$(BITS).o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/tile/kernel/machine_kexec.c b/arch/tile/kernel/machine_kexec.c index b0fa37c1a521..f0b54a934712 100644 --- a/arch/tile/kernel/machine_kexec.c +++ b/arch/tile/kernel/machine_kexec.c @@ -31,6 +31,8 @@ #include #include #include +#include +#include #include @@ -222,11 +224,22 @@ struct page *kimage_alloc_pages_arch(gfp_t gfp_mask, unsigned int order) return alloc_pages_node(0, gfp_mask, order); } +/* + * Address range in which pa=va mapping is set in setup_quasi_va_is_pa(). + * For tilepro, PAGE_OFFSET is used since this is the largest possbile value + * for tilepro, while for tilegx, we limit it to entire middle level page + * table which we assume has been allocated and is undoubtedly large enough. + */ +#ifndef __tilegx__ +#define QUASI_VA_IS_PA_ADDR_RANGE PAGE_OFFSET +#else +#define QUASI_VA_IS_PA_ADDR_RANGE PGDIR_SIZE +#endif + static void setup_quasi_va_is_pa(void) { - HV_PTE *pgtable; HV_PTE pte; - int i; + unsigned long i; /* * Flush our TLB to prevent conflicts between the previous contents @@ -234,16 +247,22 @@ static void setup_quasi_va_is_pa(void) */ local_flush_tlb_all(); - /* setup VA is PA, at least up to PAGE_OFFSET */ - - pgtable = (HV_PTE *)current->mm->pgd; + /* + * setup VA is PA, at least up to QUASI_VA_IS_PA_ADDR_RANGE. + * Note here we assume that level-1 page table is defined by + * HPAGE_SIZE. + */ pte = hv_pte(_PAGE_KERNEL | _PAGE_HUGE_PAGE); pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3); - - for (i = 0; i < pgd_index(PAGE_OFFSET); i++) { + for (i = 0; i < (QUASI_VA_IS_PA_ADDR_RANGE >> HPAGE_SHIFT); i++) { + unsigned long vaddr = i << HPAGE_SHIFT; + pgd_t *pgd = pgd_offset(current->mm, vaddr); + pud_t *pud = pud_offset(pgd, vaddr); + pte_t *ptep = (pte_t *) pmd_offset(pud, vaddr); unsigned long pfn = i << (HPAGE_SHIFT - PAGE_SHIFT); + if (pfn_valid(pfn)) - __set_pte(&pgtable[i], pfn_pte(pfn, pte)); + __set_pte(ptep, pfn_pte(pfn, pte)); } } diff --git a/arch/tile/kernel/relocate_kernel.S b/arch/tile/kernel/relocate_kernel_32.S similarity index 100% rename from arch/tile/kernel/relocate_kernel.S rename to arch/tile/kernel/relocate_kernel_32.S diff --git a/arch/tile/kernel/relocate_kernel_64.S b/arch/tile/kernel/relocate_kernel_64.S new file mode 100644 index 000000000000..1c09a4f5a4ea --- /dev/null +++ b/arch/tile/kernel/relocate_kernel_64.S @@ -0,0 +1,260 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * copy new kernel into place and then call hv_reexec + * + */ + +#include +#include +#include +#include + +#undef RELOCATE_NEW_KERNEL_VERBOSE + +STD_ENTRY(relocate_new_kernel) + + move r30, r0 /* page list */ + move r31, r1 /* address of page we are on */ + move r32, r2 /* start address of new kernel */ + + shrui r1, r1, PAGE_SHIFT + addi r1, r1, 1 + shli sp, r1, PAGE_SHIFT + addi sp, sp, -8 + /* we now have a stack (whether we need one or not) */ + + moveli r40, hw2_last(hv_console_putc) + shl16insli r40, r40, hw1(hv_console_putc) + shl16insli r40, r40, hw0(hv_console_putc) + +#ifdef RELOCATE_NEW_KERNEL_VERBOSE + moveli r0, 'r' + jalr r40 + + moveli r0, '_' + jalr r40 + + moveli r0, 'n' + jalr r40 + + moveli r0, '_' + jalr r40 + + moveli r0, 'k' + jalr r40 + + moveli r0, '\n' + jalr r40 +#endif + + /* + * Throughout this code r30 is pointer to the element of page + * list we are working on. + * + * Normally we get to the next element of the page list by + * incrementing r30 by eight. The exception is if the element + * on the page list is an IND_INDIRECTION in which case we use + * the element with the low bits masked off as the new value + * of r30. + * + * To get this started, we need the value passed to us (which + * will always be an IND_INDIRECTION) in memory somewhere with + * r30 pointing at it. To do that, we push the value passed + * to us on the stack and make r30 point to it. + */ + + st sp, r30 + move r30, sp + addi sp, sp, -16 + +#if CHIP_HAS_CBOX_HOME_MAP() + /* + * On TILE-GX, we need to flush all tiles' caches, since we may + * have been doing hash-for-home caching there. Note that we + * must do this _after_ we're completely done modifying any memory + * other than our output buffer (which we know is locally cached). + * We want the caches to be fully clean when we do the reexec, + * because the hypervisor is going to do this flush again at that + * point, and we don't want that second flush to overwrite any memory. + */ + { + move r0, zero /* cache_pa */ + moveli r1, hw2_last(HV_FLUSH_EVICT_L2) + } + { + shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2) + movei r2, -1 /* cache_cpumask; -1 means all client tiles */ + } + { + shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2) /* cache_control */ + move r3, zero /* tlb_va */ + } + { + move r4, zero /* tlb_length */ + move r5, zero /* tlb_pgsize */ + } + { + move r6, zero /* tlb_cpumask */ + move r7, zero /* asids */ + } + { + moveli r20, hw2_last(hv_flush_remote) + move r8, zero /* asidcount */ + } + shl16insli r20, r20, hw1(hv_flush_remote) + shl16insli r20, r20, hw0(hv_flush_remote) + + jalr r20 +#endif + + /* r33 is destination pointer, default to zero */ + + moveli r33, 0 + +.Lloop: ld r10, r30 + + andi r9, r10, 0xf /* low 4 bits tell us what type it is */ + xor r10, r10, r9 /* r10 is now value with low 4 bits stripped */ + + cmpeqi r0, r9, 0x1 /* IND_DESTINATION */ + beqzt r0, .Ltry2 + + move r33, r10 + +#ifdef RELOCATE_NEW_KERNEL_VERBOSE + moveli r0, 'd' + jalr r40 +#endif + + addi r30, r30, 8 + j .Lloop + +.Ltry2: + cmpeqi r0, r9, 0x2 /* IND_INDIRECTION */ + beqzt r0, .Ltry4 + + move r30, r10 + +#ifdef RELOCATE_NEW_KERNEL_VERBOSE + moveli r0, 'i' + jalr r40 +#endif + + j .Lloop + +.Ltry4: + cmpeqi r0, r9, 0x4 /* IND_DONE */ + beqzt r0, .Ltry8 + + mf + +#ifdef RELOCATE_NEW_KERNEL_VERBOSE + moveli r0, 'D' + jalr r40 + moveli r0, '\n' + jalr r40 +#endif + + move r0, r32 + + moveli r41, hw2_last(hv_reexec) + shl16insli r41, r41, hw1(hv_reexec) + shl16insli r41, r41, hw0(hv_reexec) + + jalr r41 + + /* we should not get here */ + + moveli r0, '?' + jalr r40 + moveli r0, '\n' + jalr r40 + + j .Lhalt + +.Ltry8: cmpeqi r0, r9, 0x8 /* IND_SOURCE */ + beqz r0, .Lerr /* unknown type */ + + /* copy page at r10 to page at r33 */ + + move r11, r33 + + moveli r0, hw2_last(PAGE_SIZE) + shl16insli r0, r0, hw1(PAGE_SIZE) + shl16insli r0, r0, hw0(PAGE_SIZE) + add r33, r33, r0 + + /* copy word at r10 to word at r11 until r11 equals r33 */ + + /* We know page size must be multiple of 8, so we can unroll + * 8 times safely without any edge case checking. + * + * Issue a flush of the destination every 8 words to avoid + * incoherence when starting the new kernel. (Now this is + * just good paranoia because the hv_reexec call will also + * take care of this.) + */ + +1: + { ld r0, r10; addi r10, r10, 8 } + { st r11, r0; addi r11, r11, 8 } + { ld r0, r10; addi r10, r10, 8 } + { st r11, r0; addi r11, r11, 8 } + { ld r0, r10; addi r10, r10, 8 } + { st r11, r0; addi r11, r11, 8 } + { ld r0, r10; addi r10, r10, 8 } + { st r11, r0; addi r11, r11, 8 } + { ld r0, r10; addi r10, r10, 8 } + { st r11, r0; addi r11, r11, 8 } + { ld r0, r10; addi r10, r10, 8 } + { st r11, r0; addi r11, r11, 8 } + { ld r0, r10; addi r10, r10, 8 } + { st r11, r0; addi r11, r11, 8 } + { ld r0, r10; addi r10, r10, 8 } + { st r11, r0 } + { flush r11 ; addi r11, r11, 8 } + + cmpeq r0, r33, r11 + beqzt r0, 1b + +#ifdef RELOCATE_NEW_KERNEL_VERBOSE + moveli r0, 's' + jalr r40 +#endif + + addi r30, r30, 8 + j .Lloop + + +.Lerr: moveli r0, 'e' + jalr r40 + moveli r0, 'r' + jalr r40 + moveli r0, 'r' + jalr r40 + moveli r0, '\n' + jalr r40 +.Lhalt: + moveli r41, hw2_last(hv_halt) + shl16insli r41, r41, hw1(hv_halt) + shl16insli r41, r41, hw0(hv_halt) + + jalr r41 + STD_ENDPROC(relocate_new_kernel) + + .section .rodata,"a" + + .globl relocate_new_kernel_size +relocate_new_kernel_size: + .long .Lend_relocate_new_kernel - relocate_new_kernel