From: Rafa³ Bilski Date: Tue, 15 Aug 2006 23:07:33 +0000 (+0200) Subject: [CPUFREQ] Longhaul - Add voltage scaling to driver X-Git-Tag: v2.6.19-rc1~1283^2~3 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=db44aaf3a2f599163c53ce96658aca688b3466f0;p=karo-tx-linux.git [CPUFREQ] Longhaul - Add voltage scaling to driver Rename option "dont_scale_voltage" to "scale_voltage" because don't will be default. Use "pos" for calculating voltage. In this way driver don't need to know mV value or low level value. Simply min U is one pos and max U is second pos. All pos between these two are used. Assume that min U is for min f and max U for max f. For frequency between min and max calculate pos based on difference between current frequency and min f. Values in mobile VRM table changed to values from C3-M datasheet. Signed-off-by: Rafa³ Bilski Signed-off-by: Dave Jones --- diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 43bbf948d45d..f5cc9f5c9bab 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -53,19 +53,26 @@ #define CPU_NEHEMIAH 5 static int cpu_model; -static unsigned int numscales=16, numvscales; +static unsigned int numscales=16; static unsigned int fsb; -static int minvid, maxvid; + +static struct mV_pos *vrm_mV_table; +static unsigned char *mV_vrm_table; +struct f_msr { + unsigned char vrm; +}; +static struct f_msr f_msr_table[32]; + +static unsigned int highest_speed, lowest_speed; /* kHz */ static unsigned int minmult, maxmult; static int can_scale_voltage; -static int vrmrev; static struct acpi_processor *pr = NULL; static struct acpi_processor_cx *cx = NULL; -static int port22_en = 0; +static int port22_en; /* Module parameters */ -static int dont_scale_voltage; -static int ignore_latency = 0; +static int scale_voltage; +static int ignore_latency; #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) @@ -73,7 +80,6 @@ static int ignore_latency = 0; /* Clock ratios multiplied by 10 */ static int clock_ratio[32]; static int eblcr_table[32]; -static int voltage_table[32]; static unsigned int highest_speed, lowest_speed; /* kHz */ static int longhaul_version; static struct cpufreq_frequency_table *longhaul_table; @@ -163,6 +169,11 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; longhaul.bits.EnableSoftBusRatio = 1; + if (can_scale_voltage) { + longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm; + longhaul.bits.EnableSoftVID = 1; + } + /* Sync to timer tick */ safe_halt(); /* Change frequency on next halt or sleep */ @@ -454,53 +465,57 @@ static int __init longhaul_get_ranges(void) static void __init longhaul_setup_voltagescaling(void) { union msr_longhaul longhaul; + struct mV_pos minvid, maxvid; + unsigned int j, speed, pos, kHz_step, numvscales; - rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); - - if (!(longhaul.bits.RevisionID & 1)) + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + if (!(longhaul.bits.RevisionID & 1)) { + printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); return; + } + + if (!longhaul.bits.VRMRev) { + printk (KERN_INFO PFX "VRM 8.5\n"); + vrm_mV_table = &vrm85_mV[0]; + mV_vrm_table = &mV_vrm85[0]; + } else { + printk (KERN_INFO PFX "Mobile VRM\n"); + vrm_mV_table = &mobilevrm_mV[0]; + mV_vrm_table = &mV_mobilevrm[0]; + } - minvid = longhaul.bits.MinimumVID; - maxvid = longhaul.bits.MaximumVID; - vrmrev = longhaul.bits.VRMRev; + minvid = vrm_mV_table[longhaul.bits.MinimumVID]; + maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; + numvscales = maxvid.pos - minvid.pos + 1; + kHz_step = (highest_speed - lowest_speed) / numvscales; - if (minvid == 0 || maxvid == 0) { + if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " "Voltage scaling disabled.\n", - minvid/1000, minvid%1000, maxvid/1000, maxvid%1000); + minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000); return; } - if (minvid == maxvid) { + if (minvid.mV == maxvid.mV) { printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are " "both %d.%03d. Voltage scaling disabled\n", - maxvid/1000, maxvid%1000); + maxvid.mV/1000, maxvid.mV%1000); return; } - if (vrmrev==0) { - dprintk ("VRM 8.5\n"); - memcpy (voltage_table, vrm85scales, sizeof(voltage_table)); - numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25; - } else { - dprintk ("Mobile VRM\n"); - memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table)); - numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5; + printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n", + maxvid.mV/1000, maxvid.mV%1000, + minvid.mV/1000, minvid.mV%1000, + numvscales); + + j = 0; + while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { + speed = longhaul_table[j].frequency; + pos = (speed - lowest_speed) / kHz_step + minvid.pos; + f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos]; + j++; } - /* Current voltage isn't readable at first, so we need to - set it to a known value. The spec says to use maxvid */ - longhaul.bits.RevisionKey = longhaul.bits.RevisionID; /* FIXME: This is bad. */ - longhaul.bits.EnableSoftVID = 1; - longhaul.bits.SoftVID = maxvid; - wrmsrl (MSR_VIA_LONGHAUL, longhaul.val); - - minvid = voltage_table[minvid]; - maxvid = voltage_table[maxvid]; - - dprintk ("Min VID=%d.%03d Max VID=%d.%03d, %d possible voltage scales\n", - maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales); - can_scale_voltage = 1; } @@ -685,7 +700,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) return ret; if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) && - (dont_scale_voltage==0)) + (scale_voltage != 0)) longhaul_setup_voltagescaling(); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; @@ -773,8 +788,8 @@ static void __exit longhaul_exit(void) kfree(longhaul_table); } -module_param (dont_scale_voltage, int, 0644); -MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor"); +module_param (scale_voltage, int, 0644); +MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); module_param(ignore_latency, int, 0644); MODULE_PARM_DESC(ignore_latency, "Skip ACPI C3 latency test"); diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h index d3a95d77ee85..bc4682aad69b 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h @@ -450,17 +450,45 @@ static int __initdata nehemiah_c_eblcr[32] = { * Voltage scales. Div/Mod by 1000 to get actual voltage. * Which scale to use depends on the VRM type in use. */ -static int __initdata vrm85scales[32] = { - 1250, 1200, 1150, 1100, 1050, 1800, 1750, 1700, - 1650, 1600, 1550, 1500, 1450, 1400, 1350, 1300, - 1275, 1225, 1175, 1125, 1075, 1825, 1775, 1725, - 1675, 1625, 1575, 1525, 1475, 1425, 1375, 1325, + +struct mV_pos { + unsigned short mV; + unsigned short pos; +}; + +static struct mV_pos __initdata vrm85_mV[32] = { + {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2}, + {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26}, + {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18}, + {1450, 16}, {1400, 14}, {1350, 12}, {1300, 10}, + {1275, 9}, {1225, 7}, {1175, 5}, {1125, 3}, + {1075, 1}, {1825, 31}, {1775, 29}, {1725, 27}, + {1675, 25}, {1625, 23}, {1575, 21}, {1525, 19}, + {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11} +}; + +static unsigned char __initdata mV_vrm85[32] = { + 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11, + 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d, + 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19, + 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15 +}; + +static struct mV_pos __initdata mobilevrm_mV[32] = { + {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28}, + {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24}, + {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20}, + {1150, 19}, {1100, 18}, {1050, 17}, {1000, 16}, + {975, 15}, {950, 14}, {925, 13}, {900, 12}, + {875, 11}, {850, 10}, {825, 9}, {800, 8}, + {775, 7}, {750, 6}, {725, 5}, {700, 4}, + {675, 3}, {650, 2}, {625, 1}, {600, 0} }; -static int __initdata mobilevrmscales[32] = { - 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, - 1600, 1550, 1500, 1450, 1500, 1350, 1300, -1, - 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, - 1075, 1050, 1025, 1000, 975, 950, 925, -1, +static unsigned char __initdata mV_mobilevrm[32] = { + 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, + 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, + 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, + 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00 };