From: Jacob Keller Date: Fri, 16 Oct 2015 17:57:09 +0000 (-0700) Subject: fm10k: change default Tx ITR to 25usec X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=dbf4284886c59a17dc0081cee39039ac2a546078;p=linux-beck.git fm10k: change default Tx ITR to 25usec The current default ITR for Tx is overly restrictive. Using a simple netperf TCP_STREAM test, we top out at about 10Gb/s for a single thread when running using 1500 byte frames. By reducing the ITR value to 25usec (up to 40K interrupts a second from 10K), we are able to achieve 36Gb/s for a single thread TCP stream test. Signed-off-by: Jacob Keller Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h index 115033f6539e..fa26e20445a5 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k.h +++ b/drivers/net/ethernet/intel/fm10k/fm10k.h @@ -171,11 +171,12 @@ struct fm10k_ring_container { #define FM10K_ITR_MAX 0x0FFF /* maximum value for ITR */ #define FM10K_ITR_10K 100 /* 100us */ #define FM10K_ITR_20K 50 /* 50us */ +#define FM10K_ITR_40K 25 /* 25us */ #define FM10K_ITR_ADAPTIVE 0x8000 /* adaptive interrupt moderation flag */ #define ITR_IS_ADAPTIVE(itr) (!!(itr & FM10K_ITR_ADAPTIVE)) -#define FM10K_TX_ITR_DEFAULT FM10K_ITR_10K +#define FM10K_TX_ITR_DEFAULT FM10K_ITR_40K #define FM10K_RX_ITR_DEFAULT FM10K_ITR_20K #define FM10K_ITR_ENABLE (FM10K_ITR_AUTOMASK | FM10K_ITR_MASK_CLEAR)