From: Dinh Nguyen Date: Tue, 13 Aug 2013 14:59:00 +0000 (-0500) Subject: phy: micrel: Add definitions for common Micrel PHY registers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=dc76a1adfa12ad11957bdeec565dbccf37205d04;p=linux-beck.git phy: micrel: Add definitions for common Micrel PHY registers Add defines for common Micrel PHY setups so that other platforms can use them. Update imx61 and sama5 hardware to use the micrel_phy.h PHY defines. Also add support for the KSZ9021RLRN PHY. Signed-off-by: Dinh Nguyen Acked-by: Nicolas Ferre Acked-by: David S. Miller CC: Andrew Victor CC: Jean-Christophe Plagniol-Villard Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo --- diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index ad95f6a23a28..bf00d15d954d 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -42,20 +42,15 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy) { int value; -#define GMII_RCCPSR 260 -#define GMII_RRDPSR 261 -#define GMII_ERCR 11 -#define GMII_ERDWR 12 - /* Set delay values */ - value = GMII_RCCPSR | 0x8000; - phy_write(phy, GMII_ERCR, value); + value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000; + phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); value = 0xF2F4; - phy_write(phy, GMII_ERDWR, value); - value = GMII_RRDPSR | 0x8000; - phy_write(phy, GMII_ERCR, value); + phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); + value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000; + phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); value = 0x2222; - phy_write(phy, GMII_ERDWR, value); + phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); return 0; } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index c730af673085..1e093abe7b95 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -103,13 +103,16 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ - phy_write(phydev, 0x0b, 0x8105); - phy_write(phydev, 0x0c, 0x0000); + phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, + 0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW); + phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000); /* max rx/tx clock delay, min rx/tx control delay */ - phy_write(phydev, 0x0b, 0x8104); - phy_write(phydev, 0x0c, 0xf0f0); - phy_write(phydev, 0x0b, 0x104); + phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, + 0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW); + phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0); + phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, + MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW); } return 0; diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 8752dbbc6135..ad05ce60c1c9 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -17,6 +17,7 @@ #define PHY_ID_KSZ8873MLL 0x000e7237 #define PHY_ID_KSZ9021 0x00221610 +#define PHY_ID_KSZ9021RLRN 0x00221611 #define PHY_ID_KS8737 0x00221720 #define PHY_ID_KSZ8021 0x00221555 #define PHY_ID_KSZ8031 0x00221556 @@ -35,4 +36,9 @@ /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 +#define MICREL_KSZ9021_EXTREG_CTRL 0xB +#define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC +#define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW 0x104 +#define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW 0x105 + #endif /* _MICREL_PHY_H */