From: Antti Palosaari Date: Tue, 30 Jul 2013 20:22:25 +0000 (-0300) Subject: [media] dvb_usb_v2: get rid of deferred probe X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=dd0f5e0b75540f7bfca99c5a664c61ac90e52514;p=linux-beck.git [media] dvb_usb_v2: get rid of deferred probe Deferred probe was added in order to avoid udev vs. Kernel firmware download problems. It is not needed anymore. https://bugzilla.redhat.com/show_bug.cgi?id=827538 Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h index 399916bd588f..124b4baa7e97 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb.h +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h @@ -352,9 +352,7 @@ struct dvb_usb_adapter { * @rc_map: name of rc codes table * @rc_polling_active: set when RC polling is active * @udev: pointer to the device's struct usb_device - * @intf: pointer to the device's usb interface * @rc: remote controller configuration - * @probe_work: work to defer .probe() * @powered: indicated whether the device is power or not * @usb_mutex: mutex for usb control messages * @i2c_mutex: mutex for i2c-transfers @@ -370,10 +368,7 @@ struct dvb_usb_device { const char *rc_map; bool rc_polling_active; struct usb_device *udev; - struct usb_interface *intf; struct dvb_usb_rc rc; - struct work_struct probe_work; - pid_t work_pid; int powered; /* locking */ diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c index 19f6737d9817..8a054d66e708 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -833,20 +833,44 @@ err: return ret; } -/* - * udev, which is used for the firmware downloading, requires we cannot - * block during module_init(). module_init() calls USB probe() which - * is this routine. Due to that we delay actual operation using workqueue - * and return always success here. - */ -static void dvb_usbv2_init_work(struct work_struct *work) +int dvb_usbv2_probe(struct usb_interface *intf, + const struct usb_device_id *id) { int ret; - struct dvb_usb_device *d = - container_of(work, struct dvb_usb_device, probe_work); + struct dvb_usb_device *d; + struct usb_device *udev = interface_to_usbdev(intf); + struct dvb_usb_driver_info *driver_info = + (struct dvb_usb_driver_info *) id->driver_info; + + dev_dbg(&udev->dev, "%s: bInterfaceNumber=%d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + + if (!id->driver_info) { + dev_err(&udev->dev, "%s: driver_info failed\n", KBUILD_MODNAME); + ret = -ENODEV; + goto err; + } + + d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL); + if (!d) { + dev_err(&udev->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); + ret = -ENOMEM; + goto err; + } - d->work_pid = current->pid; - dev_dbg(&d->udev->dev, "%s: work_pid=%d\n", __func__, d->work_pid); + d->name = driver_info->name; + d->rc_map = driver_info->rc_map; + d->udev = udev; + d->props = driver_info->props; + + if (intf->cur_altsetting->desc.bInterfaceNumber != + d->props->bInterfaceNumber) { + ret = -ENODEV; + goto err_free_all; + } + + mutex_init(&d->usb_mutex); + mutex_init(&d->i2c_mutex); if (d->props->size_of_priv) { d->priv = kzalloc(d->props->size_of_priv, GFP_KERNEL); @@ -854,7 +878,7 @@ static void dvb_usbv2_init_work(struct work_struct *work) dev_err(&d->udev->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); ret = -ENOMEM; - goto err_usb_driver_release_interface; + goto err_free_all; } } @@ -884,20 +908,12 @@ static void dvb_usbv2_init_work(struct work_struct *work) * device. As 'new' device is warm we should * never go here again. */ - return; + goto exit; } else { - /* - * Unexpected error. We must unregister driver - * manually from the device, because device is - * already register by returning from probe() - * with success. usb_driver_release_interface() - * finally calls disconnect() in order to free - * resources. - */ - goto err_usb_driver_release_interface; + goto err_free_all; } } else { - goto err_usb_driver_release_interface; + goto err_free_all; } } @@ -906,73 +922,17 @@ static void dvb_usbv2_init_work(struct work_struct *work) ret = dvb_usbv2_init(d); if (ret < 0) - goto err_usb_driver_release_interface; + goto err_free_all; dev_info(&d->udev->dev, "%s: '%s' successfully initialized and connected\n", KBUILD_MODNAME, d->name); - - return; -err_usb_driver_release_interface: - dev_info(&d->udev->dev, "%s: '%s' error while loading driver (%d)\n", - KBUILD_MODNAME, d->name, ret); - usb_driver_release_interface(to_usb_driver(d->intf->dev.driver), - d->intf); - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return; -} - -int dvb_usbv2_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int ret; - struct dvb_usb_device *d; - struct usb_device *udev = interface_to_usbdev(intf); - struct dvb_usb_driver_info *driver_info = - (struct dvb_usb_driver_info *) id->driver_info; - - dev_dbg(&udev->dev, "%s: bInterfaceNumber=%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); - - if (!id->driver_info) { - dev_err(&udev->dev, "%s: driver_info failed\n", KBUILD_MODNAME); - ret = -ENODEV; - goto err; - } - - d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL); - if (!d) { - dev_err(&udev->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); - ret = -ENOMEM; - goto err; - } - - d->name = driver_info->name; - d->rc_map = driver_info->rc_map; - d->udev = udev; - d->intf = intf; - d->props = driver_info->props; - - if (d->intf->cur_altsetting->desc.bInterfaceNumber != - d->props->bInterfaceNumber) { - ret = -ENODEV; - goto err_kfree; - } - - mutex_init(&d->usb_mutex); - mutex_init(&d->i2c_mutex); - INIT_WORK(&d->probe_work, dvb_usbv2_init_work); +exit: usb_set_intfdata(intf, d); - ret = schedule_work(&d->probe_work); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: schedule_work() failed\n", - KBUILD_MODNAME); - goto err_kfree; - } return 0; -err_kfree: - kfree(d); +err_free_all: + dvb_usbv2_exit(d); err: dev_dbg(&udev->dev, "%s: failed=%d\n", __func__, ret); return ret; @@ -984,12 +944,8 @@ void dvb_usbv2_disconnect(struct usb_interface *intf) struct dvb_usb_device *d = usb_get_intfdata(intf); const char *name = d->name; struct device dev = d->udev->dev; - dev_dbg(&d->udev->dev, "%s: pid=%d work_pid=%d\n", __func__, - current->pid, d->work_pid); - - /* ensure initialization work is finished until release resources */ - if (d->work_pid != current->pid) - cancel_work_sync(&d->probe_work); + dev_dbg(&d->udev->dev, "%s: bInterfaceNumber=%d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); if (d->props->exit) d->props->exit(d);