From: Andrew Lunn <andrew@lunn.ch>
Date: Fri, 31 Oct 2014 22:13:31 +0000 (+0100)
Subject: ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=dd5dc02e679c33b74a918faff596a7381e6bce5e;p=linux-beck.git

ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture

The DIR665 has an 8 port Ethernet Switch, a Marvell mv88e6171. Add a
DSA node in DT, to instantiate DSA support for the 4 back panel ports,
the Internet port, and the port to the CPU which is connected to eth0.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1414793613-11798-3-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---

diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index d5ca9284db13..786959ee9cbe 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -202,6 +202,51 @@
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0port>;
+		dsa,mii-bus = <&mdio>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan3";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@6 {
+			       reg = <6>;
+			       label = "cpu";
+			};
+		};
+	};
 };
 
 &mdio {