From: Luis R. Rodriguez Date: Mon, 19 Oct 2009 06:33:46 +0000 (-0400) Subject: ath9k_hw: make ath9k_phy_modify_rx_buffer() static X-Git-Tag: v2.6.33-rc1~388^2~449^2~120 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ddcd4c08188dc512ceb08bcc3f4f830c2dbfb5ce;p=karo-tx-linux.git ath9k_hw: make ath9k_phy_modify_rx_buffer() static To do this we reorder callers in order in which they are called. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c index df55e28a6560..13ab4d7eb7aa 100644 --- a/drivers/net/wireless/ath/ath9k/phy.c +++ b/drivers/net/wireless/ath/ath9k/phy.c @@ -41,10 +41,6 @@ #include "hw.h" -static void ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, - u32 numBits, u32 firstBit, - u32 column); - /** * ath9k_hw_write_regs - ?? * @@ -433,6 +429,43 @@ void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan) /* All code below is for non single-chip solutions */ +/** + * ath9k_phy_modify_rx_buffer() - perform analog swizzling of parameters + * @rfbuf: + * @reg32: + * @numBits: + * @firstBit: + * @column: + * + * Performs analog "swizzling" of parameters into their location. + * Used on external AR2133/AR5133 radios. + */ +static void ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, + u32 numBits, u32 firstBit, + u32 column) +{ + u32 tmp32, mask, arrayEntry, lastBit; + int32_t bitPosition, bitsLeft; + + tmp32 = ath9k_hw_reverse_bits(reg32, numBits); + arrayEntry = (firstBit - 1) / 8; + bitPosition = (firstBit - 1) % 8; + bitsLeft = numBits; + while (bitsLeft > 0) { + lastBit = (bitPosition + bitsLeft > 8) ? + 8 : bitPosition + bitsLeft; + mask = (((1 << lastBit) - 1) ^ ((1 << bitPosition) - 1)) << + (column * 8); + rfBuf[arrayEntry] &= ~mask; + rfBuf[arrayEntry] |= ((tmp32 << bitPosition) << + (column * 8)) & mask; + bitsLeft -= 8 - bitPosition; + tmp32 = tmp32 >> (8 - bitPosition); + bitPosition = 0; + arrayEntry++; + } +} + /* * Fix on 2.4 GHz band for orientation sensitivity issue by increasing * rf_pwd_icsyndiv. @@ -494,6 +527,95 @@ static void ath9k_hw_force_bias(struct ath_hw *ah, u16 synth_freq) REG_WRITE_RF_ARRAY(&ah->iniBank6, ah->analogBank6Data, reg_writes); } +/** + * ath9k_hw_decrease_chain_power() + * + * @ah: atheros hardware structure + * @chan: + * + * Only used on the AR5416 and AR5418 with the external AR2133/AR5133 radios. + * + * Sets a chain internal RF path to the lowest output power. Any + * further writes to bank6 after this setting will override these + * changes. Thus this function must be the last function in the + * sequence to modify bank 6. + * + * This function must be called after ar5416SetRfRegs() which is + * called from ath9k_hw_process_ini() due to swizzling of bank 6. + * Depends on ah->analogBank6Data being initialized by + * ath9k_hw_set_rf_regs() + * + * Additional additive reduction in power - + * change chain's switch table so chain's tx state is actually the rx + * state value. May produce different results in 2GHz/5GHz as well as + * board to board but in general should be a reduction. + * + * Activated by #ifdef ALTER_SWITCH. Not tried yet. If so, must be + * called after ah->eep_ops->set_board_values() due to RMW of + * PHY_SWITCH_CHAIN_0. + */ +void ath9k_hw_decrease_chain_power(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + int i, regWrites = 0; + u32 bank6SelMask; + u32 *bank6Temp = ah->bank6Temp; + + BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); + + switch (ah->config.diversity_control) { + case ATH9K_ANT_FIXED_A: + bank6SelMask = + (ah->config.antenna_switch_swap & ANTSWAP_AB) ? + REDUCE_CHAIN_0 : /* swapped, reduce chain 0 */ + REDUCE_CHAIN_1; /* normal, select chain 1/2 to reduce */ + break; + case ATH9K_ANT_FIXED_B: + bank6SelMask = + (ah->config.antenna_switch_swap & ANTSWAP_AB) ? + REDUCE_CHAIN_1 : /* swapped, reduce chain 1/2 */ + REDUCE_CHAIN_0; /* normal, select chain 0 to reduce */ + break; + case ATH9K_ANT_VARIABLE: + return; /* do not change anything */ + break; + default: + return; /* do not change anything */ + break; + } + + for (i = 0; i < ah->iniBank6.ia_rows; i++) + bank6Temp[i] = ah->analogBank6Data[i]; + + /* Write Bank 5 to switch Bank 6 write to selected chain only */ + REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask); + + /* + * Modify Bank6 selected chain to use lowest amplification. + * Modifies the parameters to a value of 1. + * Depends on existing bank 6 values to be cached in + * ah->analogBank6Data + */ + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0); + + REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites); + + REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053); +#ifdef ALTER_SWITCH + REG_WRITE(ah, PHY_SWITCH_CHAIN_0, + (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38) + | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38)); +#endif +} + /** * ath9k_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios * @ah: atheros hardware stucture @@ -853,43 +975,6 @@ ath9k_hw_rf_free_ext_banks(struct ath_hw *ah) #undef ATH_FREE_BANK } -/** - * ath9k_phy_modify_rx_buffer() - perform analog swizzling of parameters - * @rfbuf: - * @reg32: - * @numBits: - * @firstBit: - * @column: - * - * Performs analog "swizzling" of parameters into their location. - * Used on external AR2133/AR5133 radios. - */ -static void ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, - u32 numBits, u32 firstBit, - u32 column) -{ - u32 tmp32, mask, arrayEntry, lastBit; - int32_t bitPosition, bitsLeft; - - tmp32 = ath9k_hw_reverse_bits(reg32, numBits); - arrayEntry = (firstBit - 1) / 8; - bitPosition = (firstBit - 1) % 8; - bitsLeft = numBits; - while (bitsLeft > 0) { - lastBit = (bitPosition + bitsLeft > 8) ? - 8 : bitPosition + bitsLeft; - mask = (((1 << lastBit) - 1) ^ ((1 << bitPosition) - 1)) << - (column * 8); - rfBuf[arrayEntry] &= ~mask; - rfBuf[arrayEntry] |= ((tmp32 << bitPosition) << - (column * 8)) & mask; - bitsLeft -= 8 - bitPosition; - tmp32 = tmp32 >> (8 - bitPosition); - bitPosition = 0; - arrayEntry++; - } -} - /* * * ath9k_hw_set_rf_regs - programs rf registers based on EEPROM * @ah: atheros hardware structure @@ -979,92 +1064,3 @@ bool ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, return true; } - -/** - * ath9k_hw_decrease_chain_power() - * - * @ah: atheros hardware structure - * @chan: - * - * Only used on the AR5416 and AR5418 with the external AR2133/AR5133 radios. - * - * Sets a chain internal RF path to the lowest output power. Any - * further writes to bank6 after this setting will override these - * changes. Thus this function must be the last function in the - * sequence to modify bank 6. - * - * This function must be called after ar5416SetRfRegs() which is - * called from ath9k_hw_process_ini() due to swizzling of bank 6. - * Depends on ah->analogBank6Data being initialized by - * ath9k_hw_set_rf_regs() - * - * Additional additive reduction in power - - * change chain's switch table so chain's tx state is actually the rx - * state value. May produce different results in 2GHz/5GHz as well as - * board to board but in general should be a reduction. - * - * Activated by #ifdef ALTER_SWITCH. Not tried yet. If so, must be - * called after ah->eep_ops->set_board_values() due to RMW of - * PHY_SWITCH_CHAIN_0. - */ -void -ath9k_hw_decrease_chain_power(struct ath_hw *ah, struct ath9k_channel *chan) -{ - int i, regWrites = 0; - u32 bank6SelMask; - u32 *bank6Temp = ah->bank6Temp; - - BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); - - switch (ah->config.diversity_control) { - case ATH9K_ANT_FIXED_A: - bank6SelMask = - (ah->config.antenna_switch_swap & ANTSWAP_AB) ? - REDUCE_CHAIN_0 : /* swapped, reduce chain 0 */ - REDUCE_CHAIN_1; /* normal, select chain 1/2 to reduce */ - break; - case ATH9K_ANT_FIXED_B: - bank6SelMask = - (ah->config.antenna_switch_swap & ANTSWAP_AB) ? - REDUCE_CHAIN_1 : /* swapped, reduce chain 1/2 */ - REDUCE_CHAIN_0; /* normal, select chain 0 to reduce */ - break; - case ATH9K_ANT_VARIABLE: - return; /* do not change anything */ - break; - default: - return; /* do not change anything */ - break; - } - - for (i = 0; i < ah->iniBank6.ia_rows; i++) - bank6Temp[i] = ah->analogBank6Data[i]; - - /* Write Bank 5 to switch Bank 6 write to selected chain only */ - REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask); - - /* - * Modify Bank6 selected chain to use lowest amplification. - * Modifies the parameters to a value of 1. - * Depends on existing bank 6 values to be cached in - * ah->analogBank6Data - */ - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0); - - REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites); - - REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053); -#ifdef ALTER_SWITCH - REG_WRITE(ah, PHY_SWITCH_CHAIN_0, - (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38) - | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38)); -#endif -}