From: Michal Kazior Date: Wed, 14 May 2014 13:56:16 +0000 (+0300) Subject: ath10k: improve warm reset reliability X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=de01357b36f89ae918b12a81faf448fffe8288fc;p=linux-beck.git ath10k: improve warm reset reliability Warm reset is now able to recover after device crashes which required a cold reset before. This should greatly reduce chances of getting data bus errors or host system freezes due to buggy cold reset on some chips. kvalo: use ath10k_pci_soc_*() Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 66b1f3017f2b..02dc4083882d 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -1802,6 +1802,26 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar) ath10k_pci_sleep(ar); } +/* this function effectively clears target memory controller assert line */ +static void ath10k_pci_warm_reset_si0(struct ath10k *ar) +{ + u32 val; + + val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS); + ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS, + val | SOC_RESET_CONTROL_SI0_RST_MASK); + val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS); + + msleep(10); + + val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS); + ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS, + val & ~SOC_RESET_CONTROL_SI0_RST_MASK); + val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS); + + msleep(10); +} + static int ath10k_pci_warm_reset(struct ath10k *ar) { int ret = 0; @@ -1860,6 +1880,8 @@ static int ath10k_pci_warm_reset(struct ath10k *ar) SOC_RESET_CONTROL_ADDRESS); msleep(10); + ath10k_pci_warm_reset_si0(ar); + /* debug */ val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_CAUSE_ADDRESS);