From: Juergen Beisert Date: Mon, 23 Sep 2013 14:36:00 +0000 (+0100) Subject: Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=dee05308f602;p=linux-beck.git Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection For battery driven systems it is a very bad idea to collect the touchscreen data within a kernel busy loop. This change uses the features of the hardware to delay and accumulate samples in hardware to avoid a high interrupt and CPU load. Signed-off-by: Juergen Beisert Tested-by: Marek Vasut Acked-by: Marek Vasut Tested-by: Lothar Waßmann Signed-off-by: Jonathan Cameron CC: linux-arm-kernel@lists.infradead.org CC: linux-input@vger.kernel.org CC: devel@driverdev.osuosl.org CC: Marek Vasut CC: Fabio Estevam CC: Dmitry Torokhov CC: linux-input@vger.kernel.org --- diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 6d0cdfa0edc1..9e4b6eabf1aa 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -130,6 +130,17 @@ enum mxs_lradc_ts { MXS_LRADC_TOUCHSCREEN_5WIRE, }; +/* + * Touchscreen handling + */ +enum lradc_ts_plate { + LRADC_TOUCH = 0, + LRADC_SAMPLE_X, + LRADC_SAMPLE_Y, + LRADC_SAMPLE_PRESSURE, + LRADC_SAMPLE_VALID, +}; + struct mxs_lradc { struct device *dev; void __iomem *base; @@ -172,13 +183,25 @@ struct mxs_lradc { #define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2) #define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2) enum mxs_lradc_ts use_touchscreen; - bool stop_touchscreen; bool use_touchbutton; struct input_dev *ts_input; struct work_struct ts_work; enum mxs_lradc_id soc; + enum lradc_ts_plate cur_plate; /* statemachine */ + bool ts_valid; + unsigned ts_x_pos; + unsigned ts_y_pos; + unsigned ts_pressure; + + /* handle touchscreen's physical behaviour */ + /* samples per coordinate */ + unsigned over_sample_cnt; + /* time clocks between samples */ + unsigned over_sample_delay; + /* time in clocks to wait after the plates where switched */ + unsigned settling_delay; }; #define LRADC_CTRL0 0x00 @@ -230,19 +253,33 @@ struct mxs_lradc { #define LRADC_CH_ACCUMULATE (1 << 29) #define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) #define LRADC_CH_NUM_SAMPLES_OFFSET 24 +#define LRADC_CH_NUM_SAMPLES(x) \ + ((x) << LRADC_CH_NUM_SAMPLES_OFFSET) #define LRADC_CH_VALUE_MASK 0x3ffff #define LRADC_CH_VALUE_OFFSET 0 #define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) #define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xff << 24) #define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 +#define LRADC_DELAY_TRIGGER(x) \ + (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \ + LRADC_DELAY_TRIGGER_LRADCS_MASK) #define LRADC_DELAY_KICK (1 << 20) #define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) #define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 +#define LRADC_DELAY_TRIGGER_DELAYS(x) \ + (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \ + LRADC_DELAY_TRIGGER_DELAYS_MASK) #define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) #define LRADC_DELAY_LOOP_COUNT_OFFSET 11 +#define LRADC_DELAY_LOOP(x) \ + (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \ + LRADC_DELAY_LOOP_COUNT_MASK) #define LRADC_DELAY_DELAY_MASK 0x7ff #define LRADC_DELAY_DELAY_OFFSET 0 +#define LRADC_DELAY_DELAY(x) \ + (((x) << LRADC_DELAY_DELAY_OFFSET) & \ + LRADC_DELAY_DELAY_MASK) #define LRADC_CTRL4 0x140 #define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) @@ -322,6 +359,404 @@ static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc) return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW; } +static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc) +{ + return !!(readl(lradc->base + LRADC_STATUS) & + LRADC_STATUS_TOUCH_DETECT_RAW); +} + +static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch) +{ + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1), + LRADC_CH(ch)); + + /* from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch)); + + /* prepare the delay/loop unit according to the oversampling count */ + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) | + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) | + LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) | + LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1); + + /* wake us again, when the complete conversion is done */ + mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch), LRADC_CTRL1); + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(1 << 3) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(lradc->settling_delay), + LRADC_DELAY(2)); +} + +/* + * Pressure detection is special: + * We want to do both required measurements for the pressure detection in + * one turn. Use the hardware features to chain both conversions and let the + * hardware report one interrupt if both conversions are done + */ +static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1, + unsigned ch2) +{ + u32 reg; + + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + reg = LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1); + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1)); + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2)); + + /* from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1)); + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2)); + + /* prepare the delay/loop unit according to the oversampling count */ + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch1) | + LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */ + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) | + LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) | + LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1); + + /* wake us again, when the conversions are done */ + mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch2), LRADC_CTRL1); + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(1 << 3) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2)); +} + +static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc, + unsigned channel) +{ + u32 reg; + unsigned num_samples, val; + + reg = readl(lradc->base + LRADC_CH(channel)); + if (reg & LRADC_CH_ACCUMULATE) + num_samples = lradc->over_sample_cnt; + else + num_samples = 1; + + val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET; + return val / num_samples; +} + +static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc, + unsigned ch1, unsigned ch2) +{ + u32 reg, mask; + unsigned pressure, m1, m2; + + mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2); + reg = readl(lradc->base + LRADC_CTRL1) & mask; + + while (reg != mask) { + reg = readl(lradc->base + LRADC_CTRL1) & mask; + dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg); + } + + m1 = mxs_lradc_read_raw_channel(lradc, ch1); + m2 = mxs_lradc_read_raw_channel(lradc, ch2); + + if (m2 == 0) { + dev_warn(lradc->dev, "Cannot calculate pressure\n"); + return 1 << (LRADC_RESOLUTION - 1); + } + + /* simply scale the value from 0 ... max ADC resolution */ + pressure = m1; + pressure *= (1 << LRADC_RESOLUTION); + pressure /= m2; + + dev_dbg(lradc->dev, "Pressure = %u\n", pressure); + return pressure; +} + +#define TS_CH_XP 2 +#define TS_CH_YP 3 +#define TS_CH_XM 4 +#define TS_CH_YM 5 + +static int mxs_lradc_read_ts_channel(struct mxs_lradc *lradc) +{ + u32 reg; + int val; + + reg = readl(lradc->base + LRADC_CTRL1); + + /* only channels 3 to 5 are of interest here */ + if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YP)) { + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YP) | + LRADC_CTRL1_LRADC_IRQ(TS_CH_YP), LRADC_CTRL1); + val = mxs_lradc_read_raw_channel(lradc, TS_CH_YP); + } else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_XM)) { + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_XM) | + LRADC_CTRL1_LRADC_IRQ(TS_CH_XM), LRADC_CTRL1); + val = mxs_lradc_read_raw_channel(lradc, TS_CH_XM); + } else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YM)) { + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YM) | + LRADC_CTRL1_LRADC_IRQ(TS_CH_YM), LRADC_CTRL1); + val = mxs_lradc_read_raw_channel(lradc, TS_CH_YM); + } else { + return -EIO; + } + + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); + + return val; +} + +/* + * YP(open)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(weak+) XM(open) + * + * "weak+" means 200k Ohm VDDIO + * (-) means GND + */ +static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc) +{ + /* + * In order to detect a touch event the 'touch detect enable' bit + * enables: + * - a weak pullup to the X+ connector + * - a strong ground at the Y- connector + */ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc), + LRADC_CTRL0); +} + +/* + * YP(meas)--+-------------+ + * | |--+ + * | | | + * YM(open)--+-------------+ | + * +--------------+ + * | | + * XP(+) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_X; + mxs_lradc_setup_ts_channel(lradc, TS_CH_YP); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(open) XM(meas) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_Y; + mxs_lradc_setup_ts_channel(lradc, TS_CH_XM); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(meas)--+-------------+ | + * +--------------+ + * | | + * XP(meas) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_PRESSURE; + mxs_lradc_setup_ts_pressure(lradc, TS_CH_XP, TS_CH_YM); +} + +static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) +{ + mxs_lradc_setup_touch_detection(lradc); + + lradc->cur_plate = LRADC_TOUCH; + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); + mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); +} + +static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc) +{ + input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos); + input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos); + input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure); + input_report_key(lradc->ts_input, BTN_TOUCH, 1); + input_sync(lradc->ts_input); +} + +static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc) +{ + mxs_lradc_setup_touch_detection(lradc); + lradc->cur_plate = LRADC_SAMPLE_VALID; + /* + * start a dummy conversion to burn time to settle the signals + * note: we are not interested in the conversion's value + */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(5)); + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1); + mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(5), LRADC_CTRL1); + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << 5) | + LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */ + LRADC_DELAY(2)); +} + +/* + * in order to avoid false measurements, report only samples where + * the surface is still touched after the position measurement + */ +static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid) +{ + /* if it is still touched, report the sample */ + if (valid && mxs_lradc_check_touch_event(lradc)) { + lradc->ts_valid = true; + mxs_lradc_report_ts_event(lradc); + } + + /* if it is even still touched, continue with the next measurement */ + if (mxs_lradc_check_touch_event(lradc)) { + mxs_lradc_prepare_y_pos(lradc); + return; + } + + if (lradc->ts_valid) { + /* signal the release */ + lradc->ts_valid = false; + input_report_key(lradc->ts_input, BTN_TOUCH, 0); + input_sync(lradc->ts_input); + } + + /* if it is released, wait for the next touch via IRQ */ + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, LRADC_CTRL1); + mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); +} + +/* touchscreen's state machine */ +static void mxs_lradc_handle_touch(struct mxs_lradc *lradc) +{ + int val; + + switch (lradc->cur_plate) { + case LRADC_TOUCH: + /* + * start with the Y-pos, because it uses nearly the same plate + * settings like the touch detection + */ + if (mxs_lradc_check_touch_event(lradc)) { + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, + LRADC_CTRL1); + mxs_lradc_prepare_y_pos(lradc); + } + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, + LRADC_CTRL1); + return; + + case LRADC_SAMPLE_Y: + val = mxs_lradc_read_ts_channel(lradc); + if (val < 0) { + mxs_lradc_enable_touch_detection(lradc); /* re-start */ + return; + } + lradc->ts_y_pos = val; + mxs_lradc_prepare_x_pos(lradc); + return; + + case LRADC_SAMPLE_X: + val = mxs_lradc_read_ts_channel(lradc); + if (val < 0) { + mxs_lradc_enable_touch_detection(lradc); /* re-start */ + return; + } + lradc->ts_x_pos = val; + mxs_lradc_prepare_pressure(lradc); + return; + + case LRADC_SAMPLE_PRESSURE: + lradc->ts_pressure = + mxs_lradc_read_ts_pressure(lradc, TS_CH_XP, TS_CH_YM); + mxs_lradc_complete_touch_event(lradc); + return; + + case LRADC_SAMPLE_VALID: + val = mxs_lradc_read_ts_channel(lradc); /* ignore the value */ + mxs_lradc_finish_touch_event(lradc, 1); + break; + } +} + /* * Raw I/O operations */ @@ -395,15 +830,6 @@ static const struct iio_info mxs_lradc_iio_info = { .read_raw = mxs_lradc_read_raw, }; -/* - * Touchscreen handling - */ -enum lradc_ts_plate { - LRADC_SAMPLE_X, - LRADC_SAMPLE_Y, - LRADC_SAMPLE_PRESSURE, -}; - static int mxs_lradc_ts_touched(struct mxs_lradc *lradc) { uint32_t reg; @@ -561,10 +987,6 @@ static void mxs_lradc_ts_work(struct work_struct *ts_work) input_report_key(lradc->ts_input, BTN_TOUCH, 0); input_sync(lradc->ts_input); - /* Do not restart the TS IRQ if the driver is shutting down. */ - if (lradc->stop_touchscreen) - return; - /* Restart the touchscreen interrupts. */ mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, LRADC_CTRL1); mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); @@ -574,36 +996,29 @@ static int mxs_lradc_ts_open(struct input_dev *dev) { struct mxs_lradc *lradc = input_get_drvdata(dev); - /* The touchscreen is starting. */ - lradc->stop_touchscreen = false; - /* Enable the touch-detect circuitry. */ - mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc), - LRADC_CTRL0); - - /* Enable the touch-detect IRQ. */ - mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); + mxs_lradc_enable_touch_detection(lradc); return 0; } -static void mxs_lradc_ts_close(struct input_dev *dev) +static void mxs_lradc_disable_ts(struct mxs_lradc *lradc) { - struct mxs_lradc *lradc = input_get_drvdata(dev); + /* stop all interrupts from firing */ + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | + LRADC_CTRL1_LRADC_IRQ_EN(2) | LRADC_CTRL1_LRADC_IRQ_EN(3) | + LRADC_CTRL1_LRADC_IRQ_EN(4) | LRADC_CTRL1_LRADC_IRQ_EN(5), + LRADC_CTRL1); - /* Indicate the touchscreen is stopping. */ - lradc->stop_touchscreen = true; - mb(); - - /* Wait until touchscreen thread finishes any possible remnants. */ - cancel_work_sync(&lradc->ts_work); + /* Power-down touchscreen touch-detect circuitry. */ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); +} - /* Disable touchscreen touch-detect IRQ. */ - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, - LRADC_CTRL1); +static void mxs_lradc_ts_close(struct input_dev *dev) +{ + struct mxs_lradc *lradc = input_get_drvdata(dev); - /* Power-down touchscreen touch-detect circuitry. */ - mxs_lradc_reg_clear(lradc, mxs_lradc_touch_detect_bit(lradc), LRADC_CTRL0); + mxs_lradc_disable_ts(lradc); } static int mxs_lradc_ts_register(struct mxs_lradc *lradc) @@ -649,8 +1064,7 @@ static void mxs_lradc_ts_unregister(struct mxs_lradc *lradc) if (!lradc->use_touchscreen) return; - cancel_work_sync(&lradc->ts_work); - + mxs_lradc_disable_ts(lradc); input_unregister_device(lradc->ts_input); } @@ -663,22 +1077,17 @@ static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) struct mxs_lradc *lradc = iio_priv(iio); unsigned long reg = readl(lradc->base + LRADC_CTRL1); const uint32_t ts_irq_mask = - LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | - LRADC_CTRL1_TOUCH_DETECT_IRQ; + LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ(2) | + LRADC_CTRL1_LRADC_IRQ(3) | + LRADC_CTRL1_LRADC_IRQ(4) | + LRADC_CTRL1_LRADC_IRQ(5); if (!(reg & mxs_lradc_irq_mask(lradc))) return IRQ_NONE; - /* - * Touchscreen IRQ handling code has priority and therefore - * is placed here. In case touchscreen IRQ arrives, disable - * it ASAP - */ - if (reg & LRADC_CTRL1_TOUCH_DETECT_IRQ) { - mxs_lradc_reg_clear(lradc, ts_irq_mask, LRADC_CTRL1); - if (!lradc->stop_touchscreen) - schedule_work(&lradc->ts_work); - } + if (lradc->use_touchscreen && (reg & ts_irq_mask)) + mxs_lradc_handle_touch(lradc); if (iio_buffer_enabled(iio)) iio_trigger_poll(iio->trig, iio_get_time_ns()); @@ -975,6 +1384,17 @@ static const struct of_device_id mxs_lradc_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); +static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc, + struct device_node *lradc_node) +{ + /* TODO retrieve from device tree */ + lradc->over_sample_cnt = 4; + lradc->over_sample_delay = 2; + lradc->settling_delay = 10; + + return 0; +} + static int mxs_lradc_probe(struct platform_device *pdev) { const struct of_device_id *of_id = @@ -987,7 +1407,7 @@ static int mxs_lradc_probe(struct platform_device *pdev) struct iio_dev *iio; struct resource *iores; uint32_t ts_wires = 0; - int ret = 0; + int ret = 0, touch_ret; int i; /* Allocate the IIO device. */ @@ -1018,7 +1438,7 @@ static int mxs_lradc_probe(struct platform_device *pdev) return ret; } - INIT_WORK(&lradc->ts_work, mxs_lradc_ts_work); + touch_ret = mxs_lradc_probe_touchscreen(lradc, node); /* Check if touchscreen is enabled in DT. */ ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires", @@ -1081,9 +1501,11 @@ static int mxs_lradc_probe(struct platform_device *pdev) goto err_dev; /* Register the touchscreen input device. */ - ret = mxs_lradc_ts_register(lradc); - if (ret) - goto err_ts_register; + if (touch_ret == 0) { + ret = mxs_lradc_ts_register(lradc); + if (ret) + goto err_ts_register; + } /* Register IIO device. */ ret = iio_device_register(iio);