From: Frank Pavlic Date: Wed, 22 Mar 2006 15:03:44 +0000 (+0100) Subject: [PATCH] s390: qeth :allow setting of attribute "route6" to "no_router". X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=def720e6166f49027c45286088d1e22743666ca3;p=linux-beck.git [PATCH] s390: qeth :allow setting of attribute "route6" to "no_router". [patch 4/6] s390: qeth :allow setting of attribute "route6" to "no_router". From: Ursula Braun when setting route6 attribute back to no_router qeth does not issue an IP ASSIST command to reset router value to no_router. Once primary_router is set device stays in this mode. Issue an IP ASSIST command when no_router is set in route6. Device will be reset and thus will not longer run as a primary router. Signed-off-by: Frank Pavlic diffstat: qeth_main.c | 5 ----- 1 files changed, 5 deletions(-) Signed-off-by: Jeff Garzik --- diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 69329ea61e2b..021cd5d08c61 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -7339,11 +7339,6 @@ qeth_setrouting_v6(struct qeth_card *card) qeth_correct_routing_type(card, &card->options.route6.type, QETH_PROT_IPV6); - if ((card->options.route6.type == NO_ROUTER) || - ((card->info.type == QETH_CARD_TYPE_OSAE) && - (card->options.route6.type == MULTICAST_ROUTER) && - !qeth_is_supported6(card,IPA_OSA_MC_ROUTER))) - return 0; rc = qeth_send_setrouting(card, card->options.route6.type, QETH_PROT_IPV6); if (rc) {