From: Andrew Morton <akpm@osdl.org>
Date: Fri, 3 Feb 2006 11:04:47 +0000 (-0800)
Subject: [PATCH] ip2main.c warning fixes
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=def9391c561c60e9d0aab58abca5404acef1de4b;p=linux-beck.git

[PATCH] ip2main.c warning fixes

With Eric's "i386: Add a temporary to make put_user more type safe" patch we
get a pile of warnings out of ip2m1in.c:

drivers/char/ip2main.c: In function `ip2_ipl_ioctl':
drivers/char/ip2main.c:2910: warning: assignment makes integer from pointer without a cast
drivers/char/ip2main.c:2911: warning: assignment makes integer from pointer without a cast
drivers/char/ip2main.c:2912: warning: assignment makes integer from pointer without a cast
etc.

This ioctl is copying the kernel virtual address of a large number of
functions out to userspace.  Heaven knows why.

Rather than fixing the warnings, I think we'll just nuke that code.

The patch also fixes a couple of `defined but not used' warnings.

Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/drivers/char/ip2/i2cmd.c b/drivers/char/ip2/i2cmd.c
index cb8f4198e9a3..e7af647800b6 100644
--- a/drivers/char/ip2/i2cmd.c
+++ b/drivers/char/ip2/i2cmd.c
@@ -139,7 +139,6 @@ static UCHAR ct79[] = { 2, BYP,     0x4F,0                   }; // XMIT_NOW
 //static UCHAR ct86[]={ 2, BTH,     0x56,0                   }; // RCV_ENABLE
 static UCHAR ct87[] = { 1, BYP,     0x57                     }; // HW_TEST
 //static UCHAR ct88[]={ 3, BTH,     0x58,0,0                 }; // RCV_THRESHOLD
-static UCHAR ct89[]={ 1, BYP,     0x59                     }; // DSS_NOW
 //static UCHAR ct90[]={ 3, BYP,     0x5A,0,0                 }; // Set SILO
 //static UCHAR ct91[]={ 2, BYP,     0x5B,0                   }; // timed break
 
diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c
index 56e93a5a1e24..48fcfba37bfa 100644
--- a/drivers/char/ip2main.c
+++ b/drivers/char/ip2main.c
@@ -2906,65 +2906,16 @@ ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
 		rc = -EINVAL;
 		break;
 	case 3:	    // Trace device
-		if ( cmd == 1 ) {
-			rc = put_user(iiSendPendingMail, pIndex++ );
-			rc = put_user(i2InitChannels, pIndex++ );
-			rc = put_user(i2QueueNeeds, pIndex++ );
-			rc = put_user(i2QueueCommands, pIndex++ );
-			rc = put_user(i2GetStatus, pIndex++ );
-			rc = put_user(i2Input, pIndex++ );
-			rc = put_user(i2InputFlush, pIndex++ );
-			rc = put_user(i2Output, pIndex++ );
-			rc = put_user(i2FlushOutput, pIndex++ );
-			rc = put_user(i2DrainWakeup, pIndex++ );
-			rc = put_user(i2DrainOutput, pIndex++ );
-			rc = put_user(i2OutputFree, pIndex++ );
-			rc = put_user(i2StripFifo, pIndex++ );
-			rc = put_user(i2StuffFifoBypass, pIndex++ );
-			rc = put_user(i2StuffFifoFlow, pIndex++ );
-			rc = put_user(i2StuffFifoInline, pIndex++ );
-			rc = put_user(i2ServiceBoard, pIndex++ );
-			rc = put_user(serviceOutgoingFifo, pIndex++ );
-			// rc = put_user(ip2_init, pIndex++ );
-			rc = put_user(ip2_init_board, pIndex++ );
-			rc = put_user(find_eisa_board, pIndex++ );
-			rc = put_user(set_irq, pIndex++ );
-			rc = put_user(ip2_interrupt, pIndex++ );
-			rc = put_user(ip2_poll, pIndex++ );
-			rc = put_user(service_all_boards, pIndex++ );
-			rc = put_user(do_input, pIndex++ );
-			rc = put_user(do_status, pIndex++ );
-#ifndef IP2DEBUG_OPEN
-			rc = put_user(0, pIndex++ );
-#else
-			rc = put_user(open_sanity_check, pIndex++ );
-#endif
-			rc = put_user(ip2_open, pIndex++ );
-			rc = put_user(ip2_close, pIndex++ );
-			rc = put_user(ip2_hangup, pIndex++ );
-			rc = put_user(ip2_write, pIndex++ );
-			rc = put_user(ip2_putchar, pIndex++ );
-			rc = put_user(ip2_flush_chars, pIndex++ );
-			rc = put_user(ip2_write_room, pIndex++ );
-			rc = put_user(ip2_chars_in_buf, pIndex++ );
-			rc = put_user(ip2_flush_buffer, pIndex++ );
-
-			//rc = put_user(ip2_wait_until_sent, pIndex++ );
-			rc = put_user(0, pIndex++ );
-
-			rc = put_user(ip2_throttle, pIndex++ );
-			rc = put_user(ip2_unthrottle, pIndex++ );
-			rc = put_user(ip2_ioctl, pIndex++ );
-			rc = put_user(0, pIndex++ );
-			rc = put_user(get_serial_info, pIndex++ );
-			rc = put_user(set_serial_info, pIndex++ );
-			rc = put_user(ip2_set_termios, pIndex++ );
-			rc = put_user(ip2_set_line_discipline, pIndex++ );
-			rc = put_user(set_params, pIndex++ );
-		} else {
+		/*
+		 * akpm: This used to write a whole bunch of function addresses
+		 * to userspace, which generated lots of put_user() warnings.
+		 * I killed it all.  Just return "success" and don't do
+		 * anything.
+		 */
+		if (cmd == 1)
+			rc = 0;
+		else
 			rc = -EINVAL;
-		}
-
 		break;
 
 	default: