From: Nick Kossifidis Date: Sun, 20 Jul 2008 03:41:26 +0000 (+0300) Subject: ath5k: Reorder calibration calls during reset and update hw_set_power X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=df75dcddf99647d68f3b6b874effe5365c5024d9;p=linux-beck.git ath5k: Reorder calibration calls during reset and update hw_set_power * Update ath5k_hw_reset and add some more documentation about PHY calibration * Fix ath5k_hw_set_power to use AR5K_SLEEP_CTL_SLE_ALLOW for Network sleep * Preserve sleep duration field while setting AR5K_SLEEP_CTL and reduce delays & checks for register's status (got this from decompiling & dumps, it works for me but it needs testing) Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 3937e46e4735..ad1a5b422c8c 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -1092,34 +1092,57 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, data = 0; /* - * Enable calibration and wait until completion + * Start automatic gain calibration + * + * During AGC calibration RX path is re-routed to + * a signal detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), that doesn't + * interrupt rx path. + * + * If we are in a noisy environment AGC calibration may time + * out. */ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL); + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_calibration = false; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_calibration = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL, 0, false)) { - ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", + ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", channel->center_freq); return -EAGAIN; } + /* + * Start noise floor calibration + * + * If we run NF calibration before AGC, it always times out. + * Binary HAL starts NF and AGC calibration at the same time + * and only waits for AGC to finish. I believe that's wrong because + * during NF calibration, rx path is also routed to a detector, so if + * it doesn't finish we won't have RX. + * + * XXX: Find an interval that's OK for all cards... + */ ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); if (ret) return ret; - ah->ah_calibration = false; - - /* A and G modes can use QAM modulation which requires enabling - * I and Q calibration. Don't bother in B mode. */ - if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_RUN); - } - /* * Reset queues and start beacon timers at the end of the reset routine */ @@ -1247,7 +1270,7 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration) { unsigned int i; - u32 staid; + u32 staid, data; ATH5K_TRACE(ah->ah_sc); staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); @@ -1259,7 +1282,8 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, case AR5K_PM_NETWORK_SLEEP: if (set_chip) ath5k_hw_reg_write(ah, - AR5K_SLEEP_CTL_SLE | sleep_duration, + AR5K_SLEEP_CTL_SLE_ALLOW | + sleep_duration, AR5K_SLEEP_CTL); staid |= AR5K_STA_ID1_PWR_SV; @@ -1274,13 +1298,24 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, break; case AR5K_PM_AWAKE: + + staid &= ~AR5K_STA_ID1_PWR_SV; + if (!set_chip) goto commit; - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, - AR5K_SLEEP_CTL); + /* Preserve sleep duration */ + data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + if( data & 0xffc00000 ){ + data = 0; + } else { + data = data & 0xfffcffff; + } + + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + udelay(15); - for (i = 5000; i > 0; i--) { + for (i = 50; i > 0; i--) { /* Check if the chip did wake up */ if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_SPWR_DN) == 0) @@ -1288,15 +1323,13 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, /* Wait a bit and retry */ udelay(200); - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, - AR5K_SLEEP_CTL); + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); } /* Fail if the chip didn't wake up */ if (i <= 0) return -EIO; - staid &= ~AR5K_STA_ID1_PWR_SV; break; default: @@ -1325,6 +1358,7 @@ void ath5k_hw_start_rx(struct ath5k_hw *ah) { ATH5K_TRACE(ah->ah_sc); ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); } /* @@ -1411,6 +1445,7 @@ int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue) } /* Start queue */ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); } else { /* Return if queue is disabled */ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) @@ -1708,6 +1743,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) * (they will be re-enabled afterwards). */ ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); old_mask = ah->ah_imr; @@ -3511,7 +3547,7 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_TXE); + AR5K_QCU_MISC_RDY_VEOL_POLICY); } if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)