From: Satheeshakrishna M Date: Fri, 22 Aug 2014 04:19:09 +0000 (+0530) Subject: drm/i915/bxt: Define bxt DDI PLLs and implement enable/disable sequence X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=dfb82408471ee2e56b26c05dcd50317f873bee57;p=linux-beck.git drm/i915/bxt: Define bxt DDI PLLs and implement enable/disable sequence Plug bxt PLL code into existing shared DPLL framework. v2: (imre) - squash in Satheeshakrishna's "Define BXT clock registers" and "Add state variables for bxt clock registers" patches - squash in Vandanas's "Change grp access to lane access for PLL" - fix group vs. lane access in bxt_ddi_pll_get_hw_state - add code comment why we read from lane registers while writing to group registers - clean up register macros - use BXT_PORT_PLL_* macros instead of open-coding the same - check if BXT_PORT_PCS_DW12_LN01 matches BXT_PORT_PCS_DW12_LN23 during hardware state readout - add missing LANESTAGGER_STRAP_OVRD masking - add note about missing step according to the latest BUN for PORT_PLL_9/lockthresh Signed-off-by: Satheeshakrishna M (v1) Signed-off-by: Imre Deak Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 2645ba35b130..a7049ea164e2 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -303,6 +303,9 @@ struct intel_dpll_hw_state { uint32_t ctrl1; /* HDMI only, 0 when used for DP */ uint32_t cfgcr1, cfgcr2; + + /* bxt */ + uint32_t ebb0, pll0, pll1, pll2, pll3, pll6, pll8, pcsdw12; }; struct intel_shared_dpll_config { diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 29c41f1bba34..5c81728e4400 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1136,6 +1136,60 @@ enum skl_disp_power_wells { #define BXT_PHY_CTL_FAMILY(phy) _BXT_PHY((phy), _PHY_CTL_FAMILY_DDI, \ _PHY_CTL_FAMILY_EDP) +/* BXT PHY PLL registers */ +#define _PORT_PLL_A 0x46074 +#define _PORT_PLL_B 0x46078 +#define _PORT_PLL_C 0x4607c +#define PORT_PLL_ENABLE (1 << 31) +#define PORT_PLL_LOCK (1 << 30) +#define PORT_PLL_REF_SEL (1 << 27) +#define BXT_PORT_PLL_ENABLE(port) _PORT(port, _PORT_PLL_A, _PORT_PLL_B) + +#define _PORT_PLL_EBB_0_A 0x162034 +#define _PORT_PLL_EBB_0_B 0x6C034 +#define _PORT_PLL_EBB_0_C 0x6C340 +#define PORT_PLL_P1_MASK (0x07 << 13) +#define PORT_PLL_P1(x) ((x) << 13) +#define PORT_PLL_P2_MASK (0x1f << 8) +#define PORT_PLL_P2(x) ((x) << 8) +#define BXT_PORT_PLL_EBB_0(port) _PORT3(port, _PORT_PLL_EBB_0_A, \ + _PORT_PLL_EBB_0_B, \ + _PORT_PLL_EBB_0_C) + +#define _PORT_PLL_EBB_4_A 0x162038 +#define _PORT_PLL_EBB_4_B 0x6C038 +#define _PORT_PLL_EBB_4_C 0x6C344 +#define PORT_PLL_10BIT_CLK_ENABLE (1 << 13) +#define PORT_PLL_RECALIBRATE (1 << 14) +#define BXT_PORT_PLL_EBB_4(port) _PORT3(port, _PORT_PLL_EBB_4_A, \ + _PORT_PLL_EBB_4_B, \ + _PORT_PLL_EBB_4_C) + +#define _PORT_PLL_0_A 0x162100 +#define _PORT_PLL_0_B 0x6C100 +#define _PORT_PLL_0_C 0x6C380 +/* PORT_PLL_0_A */ +#define PORT_PLL_M2_MASK 0xFF +/* PORT_PLL_1_A */ +#define PORT_PLL_N_MASK (0x0F << 8) +#define PORT_PLL_N(x) ((x) << 8) +/* PORT_PLL_2_A */ +#define PORT_PLL_M2_FRAC_MASK 0x3FFFFF +/* PORT_PLL_3_A */ +#define PORT_PLL_M2_FRAC_ENABLE (1 << 16) +/* PORT_PLL_6_A */ +#define PORT_PLL_PROP_COEFF_MASK 0xF +#define PORT_PLL_INT_COEFF_MASK (0x1F << 8) +#define PORT_PLL_INT_COEFF(x) ((x) << 8) +#define PORT_PLL_GAIN_CTL_MASK (0x07 << 16) +#define PORT_PLL_GAIN_CTL(x) ((x) << 16) +/* PORT_PLL_8_A */ +#define PORT_PLL_TARGET_CNT_MASK 0x3FF +#define _PORT_PLL_BASE(port) _PORT3(port, _PORT_PLL_0_A, \ + _PORT_PLL_0_B, \ + _PORT_PLL_0_C) +#define BXT_PORT_PLL(port, idx) (_PORT_PLL_BASE(port) + (idx) * 4) + /* BXT PHY common lane registers */ #define _PORT_CL1CM_DW0_A 0x162000 #define _PORT_CL1CM_DW0_BC 0x6C000 @@ -1205,6 +1259,28 @@ enum skl_disp_power_wells { #define BXT_PORT_REF_DW8(phy) _BXT_PHY((phy), _PORT_REF_DW8_BC, \ _PORT_REF_DW8_A) +/* BXT PHY PCS registers */ +#define _PORT_PCS_DW12_LN01_A 0x162430 +#define _PORT_PCS_DW12_LN01_B 0x6C430 +#define _PORT_PCS_DW12_LN01_C 0x6C830 +#define _PORT_PCS_DW12_LN23_A 0x162630 +#define _PORT_PCS_DW12_LN23_B 0x6C630 +#define _PORT_PCS_DW12_LN23_C 0x6CA30 +#define _PORT_PCS_DW12_GRP_A 0x162c30 +#define _PORT_PCS_DW12_GRP_B 0x6CC30 +#define _PORT_PCS_DW12_GRP_C 0x6CE30 +#define LANESTAGGER_STRAP_OVRD (1 << 6) +#define LANE_STAGGER_MASK 0x1F +#define BXT_PORT_PCS_DW12_LN01(port) _PORT3(port, _PORT_PCS_DW12_LN01_A, \ + _PORT_PCS_DW12_LN01_B, \ + _PORT_PCS_DW12_LN01_C) +#define BXT_PORT_PCS_DW12_LN23(port) _PORT3(port, _PORT_PCS_DW12_LN23_A, \ + _PORT_PCS_DW12_LN23_B, \ + _PORT_PCS_DW12_LN23_C) +#define BXT_PORT_PCS_DW12_GRP(port) _PORT3(port, _PORT_PCS_DW12_GRP_A, \ + _PORT_PCS_DW12_GRP_B, \ + _PORT_PCS_DW12_GRP_C) + /* BXT PHY TX registers */ #define _BXT_LANE_OFFSET(lane) (((lane) >> 1) * 0x200 + \ ((lane) & 1) * 0x80) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index f98a403c6625..a6d0cb0b10fc 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1990,6 +1990,169 @@ void broxton_ddi_phy_uninit(struct drm_device *dev) I915_WRITE(BXT_P_CR_GT_DISP_PWRON, 0); } +static const char * const bxt_ddi_pll_names[] = { + "PORT PLL A", + "PORT PLL B", + "PORT PLL C", +}; + +static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, + struct intel_shared_dpll *pll) +{ + uint32_t temp; + enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ + + temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); + temp &= ~PORT_PLL_REF_SEL; + /* Non-SSC reference */ + I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); + + /* Disable 10 bit clock */ + temp = I915_READ(BXT_PORT_PLL_EBB_4(port)); + temp &= ~PORT_PLL_10BIT_CLK_ENABLE; + I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp); + + /* Write P1 & P2 */ + temp = I915_READ(BXT_PORT_PLL_EBB_0(port)); + temp &= ~(PORT_PLL_P1_MASK | PORT_PLL_P2_MASK); + temp |= pll->config.hw_state.ebb0; + I915_WRITE(BXT_PORT_PLL_EBB_0(port), temp); + + /* Write M2 integer */ + temp = I915_READ(BXT_PORT_PLL(port, 0)); + temp &= ~PORT_PLL_M2_MASK; + temp |= pll->config.hw_state.pll0; + I915_WRITE(BXT_PORT_PLL(port, 0), temp); + + /* Write N */ + temp = I915_READ(BXT_PORT_PLL(port, 1)); + temp &= ~PORT_PLL_N_MASK; + temp |= pll->config.hw_state.pll1; + I915_WRITE(BXT_PORT_PLL(port, 1), temp); + + /* Write M2 fraction */ + temp = I915_READ(BXT_PORT_PLL(port, 2)); + temp &= ~PORT_PLL_M2_FRAC_MASK; + temp |= pll->config.hw_state.pll2; + I915_WRITE(BXT_PORT_PLL(port, 2), temp); + + /* Write M2 fraction enable */ + temp = I915_READ(BXT_PORT_PLL(port, 3)); + temp &= ~PORT_PLL_M2_FRAC_ENABLE; + temp |= pll->config.hw_state.pll3; + I915_WRITE(BXT_PORT_PLL(port, 3), temp); + + /* Write coeff */ + temp = I915_READ(BXT_PORT_PLL(port, 6)); + temp &= ~PORT_PLL_PROP_COEFF_MASK; + temp &= ~PORT_PLL_INT_COEFF_MASK; + temp &= ~PORT_PLL_GAIN_CTL_MASK; + temp |= pll->config.hw_state.pll6; + I915_WRITE(BXT_PORT_PLL(port, 6), temp); + + /* Write calibration val */ + temp = I915_READ(BXT_PORT_PLL(port, 8)); + temp &= ~PORT_PLL_TARGET_CNT_MASK; + temp |= pll->config.hw_state.pll8; + I915_WRITE(BXT_PORT_PLL(port, 8), temp); + + /* + * FIXME: program PORT_PLL_9/i_lockthresh according to the latest + * specification update. + */ + + /* Recalibrate with new settings */ + temp = I915_READ(BXT_PORT_PLL_EBB_4(port)); + temp |= PORT_PLL_RECALIBRATE; + I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp); + /* Enable 10 bit clock */ + temp |= PORT_PLL_10BIT_CLK_ENABLE; + I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp); + + /* Enable PLL */ + temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); + temp |= PORT_PLL_ENABLE; + I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); + POSTING_READ(BXT_PORT_PLL_ENABLE(port)); + + if (wait_for_atomic_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & + PORT_PLL_LOCK), 200)) + DRM_ERROR("PLL %d not locked\n", port); + + /* + * While we write to the group register to program all lanes at once we + * can read only lane registers and we pick lanes 0/1 for that. + */ + temp = I915_READ(BXT_PORT_PCS_DW12_LN01(port)); + temp &= ~LANE_STAGGER_MASK; + temp &= ~LANESTAGGER_STRAP_OVRD; + temp |= pll->config.hw_state.pcsdw12; + I915_WRITE(BXT_PORT_PCS_DW12_GRP(port), temp); +} + +static void bxt_ddi_pll_disable(struct drm_i915_private *dev_priv, + struct intel_shared_dpll *pll) +{ + enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ + uint32_t temp; + + temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); + temp &= ~PORT_PLL_ENABLE; + I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); + POSTING_READ(BXT_PORT_PLL_ENABLE(port)); +} + +static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv, + struct intel_shared_dpll *pll, + struct intel_dpll_hw_state *hw_state) +{ + enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ + uint32_t val; + + if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS)) + return false; + + val = I915_READ(BXT_PORT_PLL_ENABLE(port)); + if (!(val & PORT_PLL_ENABLE)) + return false; + + hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(port)); + hw_state->pll0 = I915_READ(BXT_PORT_PLL(port, 0)); + hw_state->pll1 = I915_READ(BXT_PORT_PLL(port, 1)); + hw_state->pll2 = I915_READ(BXT_PORT_PLL(port, 2)); + hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3)); + hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6)); + hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8)); + /* + * While we write to the group register to program all lanes at once we + * can read only lane registers. We configure all lanes the same way, so + * here just read out lanes 0/1 and output a note if lanes 2/3 differ. + */ + hw_state->pcsdw12 = I915_READ(BXT_PORT_PCS_DW12_LN01(port)); + if (I915_READ(BXT_PORT_PCS_DW12_LN23(port) != hw_state->pcsdw12)) + DRM_DEBUG_DRIVER("lane stagger config different for lane 01 (%08x) and 23 (%08x)\n", + hw_state->pcsdw12, + I915_READ(BXT_PORT_PCS_DW12_LN23(port))); + + return true; +} + +static void bxt_shared_dplls_init(struct drm_i915_private *dev_priv) +{ + int i; + + dev_priv->num_shared_dpll = 3; + + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + dev_priv->shared_dplls[i].id = i; + dev_priv->shared_dplls[i].name = bxt_ddi_pll_names[i]; + dev_priv->shared_dplls[i].disable = bxt_ddi_pll_disable; + dev_priv->shared_dplls[i].enable = bxt_ddi_pll_enable; + dev_priv->shared_dplls[i].get_hw_state = + bxt_ddi_pll_get_hw_state; + } +} + void intel_ddi_pll_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -1997,6 +2160,8 @@ void intel_ddi_pll_init(struct drm_device *dev) if (IS_SKYLAKE(dev)) skl_shared_dplls_init(dev_priv); + else if (IS_BROXTON(dev)) + bxt_shared_dplls_init(dev_priv); else hsw_shared_dplls_init(dev_priv);