From: Yunhui Cui Date: Thu, 18 Aug 2016 07:37:56 +0000 (+0800) Subject: mtd:fsl-quadspi:use the property fields of SPI-NOR X-Git-Tag: v4.11-rc1~181^2~3^2~3 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=dfdb3eb56405861f691102d1bde3a5f85e2c1398;p=karo-tx-linux.git mtd:fsl-quadspi:use the property fields of SPI-NOR We can get the read/write/erase opcode from the spi nor framework directly. This patch uses the information stored in the SPI-NOR to remove the hardcode in the fsl_qspi_init_lut(). Signed-off-by: Yunhui Cui Signed-off-by: Yunhui Cui Acked-by: Han xu Signed-off-by: Cyrille Pitchen --- diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index b4d8953fb30a..c1ebefbbc145 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -373,9 +373,13 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) void __iomem *base = q->iobase; int rxfifo = q->devtype_data->rxfifo; u32 lut_base; - u8 cmd, addrlen, dummy; int i; + struct spi_nor *nor = &q->nor[0]; + u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT; + u8 read_op = nor->read_opcode; + u8 read_dm = nor->read_dummy; + fsl_qspi_unlock_lut(q); /* Clear all the LUT table */ @@ -385,20 +389,10 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* Quad Read */ lut_base = SEQID_QUAD_READ * 4; - if (q->nor_size <= SZ_16M) { - cmd = SPINOR_OP_READ_1_1_4; - addrlen = ADDR24BIT; - dummy = 8; - } else { - /* use the 4-byte address */ - cmd = SPINOR_OP_READ_1_1_4; - addrlen = ADDR32BIT; - dummy = 8; - } - - qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); - qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo), + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | + LUT1(FSL_READ, PAD4, rxfifo), base + QUADSPI_LUT(lut_base + 1)); /* Write enable */ @@ -409,16 +403,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* Page Program */ lut_base = SEQID_PP * 4; - if (q->nor_size <= SZ_16M) { - cmd = SPINOR_OP_PP; - addrlen = ADDR24BIT; - } else { - /* use the 4-byte address */ - cmd = SPINOR_OP_PP; - addrlen = ADDR32BIT; - } - - qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) | + LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1)); @@ -432,10 +418,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* Erase a sector */ lut_base = SEQID_SE * 4; - cmd = q->nor[0].erase_opcode; - addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT; - - qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) | + LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); /* Erase the whole chip */