From: Mark Kelly Date: Thu, 20 Aug 2009 01:26:20 +0000 (+0000) Subject: r6040: move down second PHY detection to r6040_init_one X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e03f614af7811f9d089862a8700e683dcc6963c6;p=mv-sheeva.git r6040: move down second PHY detection to r6040_init_one Instead of fully initializing an unusable second r6040 device, perform the PHY detection earlier and bail out in r6040_init_one when we could not read the PHY identifier. Signed-off-by: Mark Kelly Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 60bd010e8e4..7238a6fae14 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -750,14 +750,6 @@ static int r6040_up(struct net_device *dev) struct r6040_private *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; int ret; - u16 val; - - /* Check presence of a second PHY */ - val = r6040_phy_read(ioaddr, lp->phy_addr, 2); - if (val == 0xFFFF) { - printk(KERN_ERR DRV_NAME " no second PHY attached\n"); - return -EIO; - } /* Initialise and alloc RX/TX buffers */ r6040_init_txbufs(dev); @@ -1194,6 +1186,13 @@ static int __devinit r6040_init_one(struct pci_dev *pdev, lp->mii_if.phy_id_mask = 0x1f; lp->mii_if.reg_num_mask = 0x1f; + /* Check the vendor ID on the PHY, if 0xffff assume none attached */ + if (r6040_phy_read(ioaddr, lp->phy_addr, 2) == 0xffff) { + printk(KERN_ERR DRV_NAME ": Failed to detect an attached PHY\n"); + err = -ENODEV; + goto err_out_unmap; + } + /* Register net device. After this dev->name assign */ err = register_netdev(dev); if (err) {