From: Guenter Roeck Date: Sat, 25 Jun 2011 22:13:44 +0000 (-0700) Subject: hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e0455e380b5bdf8dff7c8e29423d2446d9f59040;p=linux-beck.git hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices Add ADP4000, NCP4200 and NCP4208 to the list of devices supported by the generic PMBus driver, and add device IDs to enable explicit instantiation. Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson Acked-by: Jean Delvare --- diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index 5e462fc7f99b..c36c1c1a62bb 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -13,6 +13,13 @@ Supported chips: Prefix: 'ltc2978' Addresses scanned: - Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf + * ON Semiconductor ADP4000, NCP4200, NCP4208 + Prefixes: 'adp4000', 'ncp4200', 'ncp4208' + Addresses scanned: - + Datasheets: + http://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF + http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF + http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF * Generic PMBus devices Prefix: 'pmbus' Addresses scanned: - diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 794129f48594..0a822a45085d 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -19,8 +19,8 @@ config SENSORS_PMBUS default y help If you say yes here you get hardware monitoring support for generic - PMBus devices, including but not limited to BMR450, BMR451, BMR453, - BMR454, and LTC2978. + PMBus devices, including but not limited to ADP4000, BMR450, BMR451, + BMR453, BMR454, LTC2978, NCP4200, and NCP4208. This driver can also be built as a module. If so, the module will be called pmbus. diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c index 4d8e31bcd7a3..73de9f1f3194 100644 --- a/drivers/hwmon/pmbus/pmbus.c +++ b/drivers/hwmon/pmbus/pmbus.c @@ -200,11 +200,14 @@ static int pmbus_remove(struct i2c_client *client) * Use driver_data to set the number of pages supported by the chip. */ static const struct i2c_device_id pmbus_id[] = { + {"adp4000", 1}, {"bmr450", 1}, {"bmr451", 1}, {"bmr453", 1}, {"bmr454", 1}, {"ltc2978", 8}, + {"ncp4200", 1}, + {"ncp4208", 1}, {"pmbus", 0}, {} };