From: Michal Simek Date: Wed, 10 Jul 2013 07:25:28 +0000 (+0200) Subject: spi/xilinx: Revert master->setup function removal X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e07619539017ac31004a038d1d886e2ed4d0e61a;p=linux-beck.git spi/xilinx: Revert master->setup function removal master->setup() must be initialized to be able to successfully run spi_bitbang_start() and satisfy if/else logic there. "spi: convert drivers to use bits_per_word_mask" (sha1: 24778be20f87d5aadb19624fc768b3159fa43efc) Signed-off-by: Michal Simek Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index fb56fcfdf65e..09a942852593 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -233,6 +233,21 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi, return 0; } +static int xilinx_spi_setup(struct spi_device *spi) +{ + /* always return 0, we can not check the number of bits. + * There are cases when SPI setup is called before any driver is + * there, in that case the SPI core defaults to 8 bits, which we + * do not support in some cases. But if we return an error, the + * SPI device would not be registered and no driver can get hold of it + * When the driver is there, it will call SPI setup again with the + * correct number of bits per transfer. + * If a driver setups with the wrong bit number, it will fail when + * it tries to do a transfer + */ + return 0; +} + static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi) { u8 sr; @@ -360,6 +375,7 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, xspi->bitbang.chipselect = xilinx_spi_chipselect; xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer; xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs; + xspi->bitbang.master->setup = xilinx_spi_setup; init_completion(&xspi->done); if (!request_mem_region(mem->start, resource_size(mem),