From: Jean Delvare Date: Sun, 25 Nov 2007 20:58:21 +0000 (+0100) Subject: hwmon: (lm90) Use generic i2c reads during detection X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e0ae87a49cf3e721313bf8942299f3f140c6963c;p=linux-beck.git hwmon: (lm90) Use generic i2c reads during detection As indirectly reported by Olof Johansson, the lm90 driver uses a custom i2c read function even during detection, at which point we don't know yet what device we're talking with. It would make more sense to only use the generic i2c read function at this point, so that we don't log irrelevant errors on misdetection. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 960df9fa75af..116093d0eb3e 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -531,24 +531,24 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) kind = lm90; if (kind < 0) { /* detection and identification */ - u8 man_id, chip_id, reg_config1, reg_convrate; - - if (lm90_read_reg(new_client, LM90_REG_R_MAN_ID, - &man_id) < 0 - || lm90_read_reg(new_client, LM90_REG_R_CHIP_ID, - &chip_id) < 0 - || lm90_read_reg(new_client, LM90_REG_R_CONFIG1, - ®_config1) < 0 - || lm90_read_reg(new_client, LM90_REG_R_CONVRATE, - ®_convrate) < 0) + int man_id, chip_id, reg_config1, reg_convrate; + + if ((man_id = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_MAN_ID)) < 0 + || (chip_id = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CHIP_ID)) < 0 + || (reg_config1 = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONFIG1)) < 0 + || (reg_convrate = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONVRATE)) < 0) goto exit_free; if ((address == 0x4C || address == 0x4D) && man_id == 0x01) { /* National Semiconductor */ - u8 reg_config2; + int reg_config2; - if (lm90_read_reg(new_client, LM90_REG_R_CONFIG2, - ®_config2) < 0) + if ((reg_config2 = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONFIG2)) < 0) goto exit_free; if ((reg_config1 & 0x2A) == 0x00