From: Joel Holdsworth Date: Mon, 27 Feb 2017 22:14:25 +0000 (-0600) Subject: Documentation: Add binding document for Lattice iCE40 FPGA manager X-Git-Tag: v4.12-rc1~95^2~121 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e10c11d2739fd3657d8d1d5b1fa06f9185b4f012;p=karo-tx-linux.git Documentation: Add binding document for Lattice iCE40 FPGA manager This adds documentation of the device tree bindings of the Lattice iCE40 FPGA driver for the FPGA manager framework. Signed-off-by: Joel Holdsworth Acked-by: Rob Herring Acked-by: Alan Tull Acked-by: Moritz Fischer Acked-by: Marek Vasut Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt new file mode 100644 index 000000000000..4dc412437b08 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt @@ -0,0 +1,21 @@ +Lattice iCE40 FPGA Manager + +Required properties: +- compatible: Should contain "lattice,ice40-fpga-mgr" +- reg: SPI chip select +- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000) +- cdone-gpios: GPIO input connected to CDONE pin +- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note + that unless the GPIO is held low during startup, the + FPGA will enter Master SPI mode and drive SCK with a + clock signal potentially jamming other devices on the + bus until the firmware is loaded. + +Example: + fpga: fpga@0 { + compatible = "lattice,ice40-fpga-mgr"; + reg = <0>; + spi-max-frequency = <1000000>; + cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + };