From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 26 Jun 2012 09:57:51 +0000 (+0100)
Subject: regulator: core: Check that the selector from map_voltage() is valid
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e113d792d56d4b720b3d84c122b6af84c3bfa094;p=linux-beck.git

regulator: core: Check that the selector from map_voltage() is valid

Lots of regulator drivers have checks in their map_voltage() functions
to verify that the result of the mapping is in the range originally
specified. Factor these out in the core and provide a bit of extra
defensiveness for other drivers by doing the check in the core.

Since we're now doing a list_voltage() earlier move the current mapping
back to a voltage out into the set_voltage() call to save redoing it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index a80886626230..f98a8ee29933 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2040,7 +2040,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 {
 	int ret;
 	int delay = 0;
-	int best_val;
+	int best_val = 0;
 	unsigned int selector;
 	int old_selector = -1;
 
@@ -2064,6 +2064,15 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	if (rdev->desc->ops->set_voltage) {
 		ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV,
 						   &selector);
+
+		if (ret >= 0) {
+			if (rdev->desc->ops->list_voltage)
+				best_val = rdev->desc->ops->list_voltage(rdev,
+									 selector);
+			else
+				best_val = _regulator_get_voltage(rdev);
+		}
+
 	} else if (rdev->desc->ops->set_voltage_sel) {
 		if (rdev->desc->ops->map_voltage) {
 			ret = rdev->desc->ops->map_voltage(rdev, min_uV,
@@ -2079,18 +2088,19 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 		}
 
 		if (ret >= 0) {
-			selector = ret;
-			ret = rdev->desc->ops->set_voltage_sel(rdev, ret);
+			best_val = rdev->desc->ops->list_voltage(rdev, ret);
+			if (min_uV <= best_val && max_uV >= best_val) {
+				selector = ret;
+				ret = rdev->desc->ops->set_voltage_sel(rdev,
+								       ret);
+			} else {
+				ret = -EINVAL;
+			}
 		}
 	} else {
 		ret = -EINVAL;
 	}
 
-	if (rdev->desc->ops->list_voltage)
-		best_val = rdev->desc->ops->list_voltage(rdev, selector);
-	else
-		best_val = _regulator_get_voltage(rdev);
-
 	/* Call set_voltage_time_sel if successfully obtained old_selector */
 	if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 &&
 	    rdev->desc->ops->set_voltage_time_sel) {