From: Roger Quadros Date: Fri, 4 Jul 2014 09:55:43 +0000 (+0300) Subject: ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e120fb459693bbc1ac3eabdd65c3659d7cfbfd2a;p=linux-beck.git ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on After clarification from the hardware team it was found that this 1.8V PHY supply can't be switched OFF when SoC is Active. Since the PHY IPs don't contain isolation logic built in the design to allow the power rail to be switched off, there is a very high risk of IP reliability and additional leakage paths which can result in additional power consumption. The only scenario where this rail can be switched off is part of Power on reset sequencing, but it needs to be kept always-on during operation. This patch is required for proper functionality of USB, SATA and PCIe on DRA7-evm. CC: Rajendra Nayak CC: Tero Kristo Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4adc28039c30..83089540e324 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -240,6 +240,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; };