From: Aaron Lu Date: Sat, 2 Mar 2013 05:00:37 +0000 (+0800) Subject: [libata] Avoid specialized TLA's in ZPODD's Kconfig X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e189551bf74f098bde39cb8fb72a722bb7286f99;p=linux-beck.git [libata] Avoid specialized TLA's in ZPODD's Kconfig ODD is not a common TLA for non-ATA people so they will get confused by its meaning when they are configuring the kernel. This patch fixed this problem by using ODD only after stating what it is. Signed-off-by: Aaron Lu Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 3e751b74615e..a5a3ebcbdd2c 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -59,15 +59,16 @@ config ATA_ACPI option libata.noacpi=1 config SATA_ZPODD - bool "SATA Zero Power ODD Support" + bool "SATA Zero Power Optical Disc Drive (ZPODD) support" depends on ATA_ACPI default n help - This option adds support for SATA ZPODD. It requires both - ODD and the platform support, and if enabled, will automatically - power on/off the ODD when certain condition is satisfied. This - does not impact user's experience of the ODD, only power is saved - when ODD is not in use(i.e. no disc inside). + This option adds support for SATA Zero Power Optical Disc + Drive (ZPODD). It requires both the ODD and the platform + support, and if enabled, will automatically power on/off the + ODD when certain condition is satisfied. This does not impact + end user's experience of the ODD, only power is saved when + the ODD is not in use (i.e. no disc inside). If unsure, say N.