From: Masahiro Yamada Date: Fri, 27 Nov 2015 17:22:31 +0000 (+0900) Subject: arm64: dts: uniphier: add PH1-LD10 SoC/board support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e1a0ebc8d82b64440d3ca7eac6a8489937ee2519;p=linux-beck.git arm64: dts: uniphier: add PH1-LD10 SoC/board support This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- diff --git a/MAINTAINERS b/MAINTAINERS index 6d16447fdfa8..04aacf80f23e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1651,6 +1651,7 @@ F: arch/arm/boot/dts/uniphier* F: arch/arm/include/asm/hardware/cache-uniphier.h F: arch/arm/mach-uniphier/ F: arch/arm/mm/cache-uniphier.c +F: arch/arm64/boot/dts/socionext/ F: drivers/i2c/busses/i2c-uniphier* F: drivers/pinctrl/uniphier/ F: drivers/tty/serial/8250/8250_uniphier.c diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 0e775e4d6a00..76e7510835b2 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -12,6 +12,7 @@ dts-dirs += mediatek dts-dirs += qcom dts-dirs += renesas dts-dirs += rockchip +dts-dirs += socionext dts-dirs += sprd dts-dirs += xilinx diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile new file mode 100644 index 000000000000..8d727717c24e --- /dev/null +++ b/arch/arm64/boot/dts/socionext/Makefile @@ -0,0 +1,4 @@ +dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld10-ref.dtb + +always := $(dtb-y) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts new file mode 100644 index 000000000000..3e533178ba2f --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts @@ -0,0 +1,95 @@ +/* + * Device Tree Source for UniPhier PH1-LD10 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-ld10.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-LD10 Reference Board"; + compatible = "socionext,ph1-ld10-ref", "socionext,ph1-ld10"; + + memory { + device_type = "memory"; + reg = <0 0x80000000 0 0xc0000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&extbus { + ranges = <1 0x00000000 0x42000000 0x02000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x01f00000 0x00100000>; +}; + +ðsc { + interrupts = <0 48 4>; +}; + +&serial0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi new file mode 100644 index 000000000000..0296af9cbbdb --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi @@ -0,0 +1,280 @@ +/* + * Device Tree Source for UniPhier PH1-LD10 SoC + * + * Copyright (C) 2015 Masahiro Yamada + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "socionext,ph1-ld10"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu2>; + }; + core1 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000100>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000100>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000100>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000100>; + }; + }; + + clocks { + uart_clk: uart_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <58820000>; + }; + + i2c_clk: i2c_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf01>, + <1 14 0xf01>, + <1 11 0xf01>, + <1 10 0xf01>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart_clk>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart_clk>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&uart_clk>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&uart_clk>; + }; + + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c4: i2c@58784000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58784000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 45 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + pinctrl: pinctrl@5f801000 { + compatible = "socionext,ph1-ld10-pinctrl", "syscon"; + reg = <0x5f801000 0xe00>; + }; + + gic: interrupt-controller@5fe00000 { + compatible = "arm,gic-v3"; + reg = <0x5fe00000 0x10000>, /* GICD */ + <0x5fe80000 0x80000>; /* GICR */ + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 4>; + }; + }; +}; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi new file mode 120000 index 000000000000..f42fb6f38bd3 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/uniphier-pinctrl.dtsi \ No newline at end of file diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi new file mode 120000 index 000000000000..1246db9be2a1 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/uniphier-support-card.dtsi \ No newline at end of file