From: Hartmut Knaack Date: Mon, 15 Jun 2015 21:48:26 +0000 (+0200) Subject: iio:accel:bmc150-accel: code style cleanup X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e20008ed931b9bdd90d1a3fd8c9ef9307547f4ed;p=linux-beck.git iio:accel:bmc150-accel: code style cleanup Apply the following coding style changes as indicated by checkpatch.pl in strict mode: - Please don't use multiple blank lines - braces {} should be used on all arms of this statement (if/else) - Alignment should match open parenthesis - Please don't use multiple blank lines - Blank lines aren't necessary after an open brace '{' - Missing a blank line after declarations - No space is necessary after a cast Also wrap/consolidate error messages to fit 80 characters per line and rework a comment. Signed-off-by: Hartmut Knaack Reviewed-by: Octavian Purdila Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index b812728b438e..47c6013ab376 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -241,7 +241,6 @@ static const struct { {500000, BMC150_ACCEL_SLEEP_500_MS}, {1000000, BMC150_ACCEL_SLEEP_1_SEC} }; - static int bmc150_accel_set_mode(struct bmc150_accel_data *data, enum bmc150_power_modes mode, int dur_us) @@ -259,8 +258,9 @@ static int bmc150_accel_set_mode(struct bmc150_accel_data *data, dur_val = bmc150_accel_sleep_value_table[i].reg_value; } - } else + } else { dur_val = 0; + } if (dur_val < 0) return -EINVAL; @@ -288,7 +288,7 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) { if (bmc150_accel_samp_freq_table[i].val == val && - bmc150_accel_samp_freq_table[i].val2 == val2) { + bmc150_accel_samp_freq_table[i].val2 == val2) { ret = i2c_smbus_write_byte_data( data->client, BMC150_ACCEL_REG_PMU_BW, @@ -351,8 +351,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_CHIP_ID); if (ret < 0) { - dev_err(&data->client->dev, - "Error: Reading chip id\n"); + dev_err(&data->client->dev, "Error: Reading chip id\n"); return ret; } @@ -376,8 +375,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) BMC150_ACCEL_REG_PMU_RANGE, BMC150_ACCEL_DEF_RANGE_4G); if (ret < 0) { - dev_err(&data->client->dev, - "Error writing reg_pmu_range\n"); + dev_err(&data->client->dev, "Error writing reg_pmu_range\n"); return ret; } @@ -437,12 +435,13 @@ static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on) { int ret; - if (on) + if (on) { ret = pm_runtime_get_sync(&data->client->dev); - else { + } else { pm_runtime_mark_last_busy(&data->client->dev); ret = pm_runtime_put_autosuspend(&data->client->dev); } + if (ret < 0) { dev_err(&data->client->dev, "Failed: bmc150_accel_set_power_state for %d\n", on); @@ -514,13 +513,13 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, } /* - * We will expect the enable and disable to do operation in - * in reverse order. This will happen here anyway as our - * resume operation uses sync mode runtime pm calls, the - * suspend operation will be delayed by autosuspend delay - * So the disable operation will still happen in reverse of - * enable operation. When runtime pm is disabled the mode - * is always on so sequence doesn't matter + * We will expect the enable and disable to do operation in reverse + * order. This will happen here anyway, as our resume operation uses + * sync mode runtime pm calls. The suspend operation will be delayed + * by autosuspend delay. + * So the disable operation will still happen in reverse order of + * enable operation. When runtime pm is disabled the mode is always on, + * so sequence doesn't matter. */ ret = bmc150_accel_set_power_state(data, state); if (ret < 0) @@ -574,7 +573,6 @@ out_fix_power_state: return ret; } - static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) { int ret, i; @@ -674,8 +672,9 @@ static int bmc150_accel_read_raw(struct iio_dev *indio_dev, if (chan->type == IIO_TEMP) { *val = BMC150_ACCEL_TEMP_CENTER_VAL; return IIO_VAL_INT; - } else + } else { return -EINVAL; + } case IIO_CHAN_INFO_SCALE: *val = 0; switch (chan->type) { @@ -793,7 +792,6 @@ static int bmc150_accel_read_event_config(struct iio_dev *indio_dev, enum iio_event_type type, enum iio_event_direction dir) { - struct bmc150_accel_data *data = iio_priv(indio_dev); return data->ev_enable_state; @@ -827,7 +825,7 @@ static int bmc150_accel_write_event_config(struct iio_dev *indio_dev, } static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev, - struct iio_trigger *trig) + struct iio_trigger *trig) { struct bmc150_accel_data *data = iio_priv(indio_dev); int i; @@ -963,6 +961,7 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; int64_t tstamp; uint64_t sample_period; + ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_FIFO_STATUS); if (ret < 0) { @@ -1255,7 +1254,7 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig) } static int bmc150_accel_trigger_set_state(struct iio_trigger *trig, - bool state) + bool state) { struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig); struct bmc150_accel_data *data = t->data; @@ -1314,26 +1313,32 @@ static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev) dir = IIO_EV_DIR_RISING; if (ret & BMC150_ACCEL_ANY_MOTION_BIT_X) - iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_X, - IIO_EV_TYPE_ROC, - dir), - data->timestamp); + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, + 0, + IIO_MOD_X, + IIO_EV_TYPE_ROC, + dir), + data->timestamp); + if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Y) - iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Y, - IIO_EV_TYPE_ROC, - dir), - data->timestamp); + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, + 0, + IIO_MOD_Y, + IIO_EV_TYPE_ROC, + dir), + data->timestamp); + if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Z) - iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Z, - IIO_EV_TYPE_ROC, - dir), - data->timestamp); + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, + 0, + IIO_MOD_Z, + IIO_EV_TYPE_ROC, + dir), + data->timestamp); + return ret; } @@ -1365,7 +1370,9 @@ static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private) BMC150_ACCEL_INT_MODE_LATCH_INT | BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret) - dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n"); + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + ret = IRQ_HANDLED; } else { ret = IRQ_NONE; @@ -1412,13 +1419,13 @@ static const char *bmc150_accel_match_acpi_device(struct device *dev, int *data) if (!id) return NULL; - *data = (int) id->driver_data; + *data = (int)id->driver_data; return dev_name(dev); } static int bmc150_accel_gpio_probe(struct i2c_client *client, - struct bmc150_accel_data *data) + struct bmc150_accel_data *data) { struct device *dev; struct gpio_desc *gpio;